52134 ไฟ White Mini LED light w/o niche for concrete pools, ABS faceplate/ 4 W (w/o niche 06967)

คุณสมบัติสินค้า:

SKU : 52134

มินิ LED แสงขาว ขนาด 63 มม. หน้ากากพลาสติก แบบสวมเบ้า ใช้ไฟ 12 VAC/ 4 วัตต์ (ไม่รวมเบ้า 06967) (Update 27/02/2024)

แบรนด์ : ASTRALPOOL

Share


 
 
 
 
LUMIPLUS SPOT MINI LIGHT 
Models : 52128, 52129, 52134, 52135,
52140, 52141, 52157 and 52158
    • Unit floodlamp
    • Key for Mini light
    • Installation and maintenance manual
    • Manual for electrical connection
 
(1) These models of projectors need the niche that is available separately

2. GENERAL CHARACTERISTICS:
This floodlamp is a Class III electric apparatus with very low safety voltage.
The floodlamp complies with IPX8 degree of protection (resistance to penetration of dust, solid bodies and humidity) at a
nominal immersion depth of 2 m.
This floodlamp complies with international safety standards for lights, especially the EN 60598-2-18 standard: LIGHTS
PART 2: SPECIFIC REQUIREMENTS SECTION 18 LIGHTS FOR SWIMMING POOLS AND SIMILAR APPLICATIONS.
The manufacturer is not responsible in any circumstances for assembly, installation or start-up of any electric components
which have been inserted or handled at locations other than its own premises
 
3. INSTALLATION:
• In order to clearly light a pool it is recommended to install a floodlamp every 5 m2 of water surface. In swimming pools
which are especially deep, a floodlamp is required for every 10 m3
of water volume.
• In order to prevent glare, the floodlamps should be installed so that they face away from the residence or usual view of
the swimming pool.
• In the event that lighting is used in training or competition pools, the floodlamps should be installed on the sides to
prevent glare on the swimmers.
• To avoid the need to empty the pool to change the lamp, we recommend that the floodlamp be installed in areas which
are accessible from the upper edge of the pool.
• Sealing all sections with resin systems or safety connections that comply with the IP68 rating is recommended to ensure
that both cables and cable sheaths are properly sealed. Failure to follow these steps may cause short- or long-term
damage to the light and installation cables.
เว็บไซต์นี้มีการใช้งานคุกกี้ เพื่อเพิ่มประสิทธิภาพและประสบการณ์ที่ดีในการใช้งานเว็บไซต์ของท่าน ท่านสามารถอ่านรายละเอียดเพิ่มเติมได้ที่ นโยบายความเป็นส่วนตัว  และ  นโยบายคุกกี้