1.The strip is soldered by each 0.5 meters small strips. 2.5050 RGB strip has 4 wires. Each 3 LED can be cut. 3.White and warm white strip only has two wires. Each 3 diodes can be cut. 4.When connecting RGB strip, a RGB controller is needed.(If LED Light can not be lighted up, please make sure the arrow on the strip and controller at the same side) 5.When connecting single color strip, a DC power connector is needed. You may choose to buy a single color controller or not.If LED Light can not be lighted up, please change positive(+) to negative(-) (Swap the right and left wires) Net weight 460 g. Dimension 17x25x17 cm.

10m IP68 Waterproof Flex LED Neon Light 2835 120leds/M Neon Strip Lights 12V Warm White

20m IP68 Waterproof Flex LED Neon Light 2835 120leds/M Neon Strip Lights 12V Warm White

1.The strip is soldered by each 0.5 meters small strips. 2.White and warm white strip only has two wires. Each 3 diodes can be cut. 3.When connecting single color strip, a DC power connector is needed. You may choose to buy a single color controller or not.If LED Light can not be lighted up, please change positive(+) to negative(-) (Swap the right and left wires) น้ำหนักรวมกล่องบรรจุ 460 g. ขนาดกล่องบรรจุ 17x25x17 cm.

1.The strip is soldered by each 0.5 meters small strips. 2.White and warm white strip only has two wires. Each 3 diodes can be cut. 3.When connecting single color strip, a DC power connector is needed. You may choose to buy a single color controller or not.If LED Light can not be lighted up, please change positive(+) to negative(-) (Swap the right and left wires) น้ำหนักรวมกล่องบรรจุ 460 g. ขนาดกล่องบรรจุ 17x25x17 cm.

Input voltage: 12V Output voltage: 12V Output current: Output: 3 CMOS drain-open output Mode & Pattern: 16 colors, 5 light pattern: Static/Flash/Strobe/Fade-change/RGB Smooth-change 16-classes Static Mode Dim Control 16-Speeds Control in Flash / Strobe / Fade-change / RGB Smooth-change Control box size: 50x34x22mm Remote controller size: 85x52x6mm Remote controller powered by 1 x CR2025 (Not included) Control range: 30-500cm RGB LED Strips Note: This controller is ONLY suitable for RGB strip with positive terminal(+). 1 X IR Controller 1 X 24 Key Remote 1 X English user Manual

M3-3A Receiver: Compatible Remote: M1/M2/M3/M5/M6/M7 Power Input: DC12V~DC24V Max Current Load: Max 3A*3CH Max Output Power: 108W(12V) Gray Scale Level: Max 4096*4096*4096 Dimensions: L135*W30*H20(mm) M7 Remote: Working Voltage: 3V (battery) Working Frequency: 433.92MHz Remote Distance: 40m~50m Dimensions: L104*W58*H9(mm)

Applications: The RGB amplifier applies to the voltage-controlled LED controller; it can receive PWM (Pulse Width Modulation). Each time add one RGB amplifier, the connecting number of LEDs will be more than twice. Receive RGB signal from LED controller and send the signal to another group of LED source Extend 10 meters of SMD5050 30LEDs/m RGB LED Strips/ 5 meters of SMD5050 60LEDs/m RGB LED Strips