Baracuda Saltwater Pool Equipment Set for 90–100 m³ Pools
SKU : SET-BARA-SALT-90Q-100Q
0 Sold
Quantity
Promotions and Special Offers
Buy products worth every ฿3,000 Get an instant discount 4%
Buy products worth every ฿5,000 Get an instant discount 5%
Buy products worth every ฿20,000 Get an instant discount 6%
Buy products worth every ฿40,000 Get an instant discount 7%
Buy products worth every ฿3,000 Get an instant discount 3% (For Everyone)
Buy products worth every ฿5,000 Get an instant discount 4% (For Everyone)
Buy products worth every ฿20,000 Get an instant discount 5% (For Everyone)
Buy products worth every ฿40,000 Get an instant discount 6% (For Everyone)
Short Description
A matched Baracuda pump, filter and salt chlorinator set from Fluidra, Spain, sized for 90–100 m³ pools on a 6–8 hour turnover, supplied with 250 kg of AstralPool glass media in two grades.
What's in the set
Baracuda Aquantis+ 150M pump, 1.5 HP (19.5 m³/h at 10 m head) – 1 unit
Baracuda Crystal Wave CWS-T750 fibreglass filter, Ø750 mm – 1 unit
Baracuda ZenQua Next salt chlorinator, 30 g/h – 1 set
AstralPool Active Clear Glass, fine 0.5–1.0 mm, 25 kg – 8 bags
AstralPool Active Clear Glass, coarse 1.0–3.0 mm, 25 kg – 2 bags
Baracuda Pool Set 90-100Q
Baracuda Saltwater Pool Equipment Set for 90-100 m³ Pools
SKU : SET-BARA-SALT-90Q-100QNo need to pick each component yourself. WIN WIN POOL has put together a Baracuda saltwater pool set sized to your pool, with all the core equipment: pump, filter, salt chlorinator and premium AstralPool glass filter media.
Equipment is selected for a 6-8 hour turnover, with allowance for pressure losses in the pipework and fittings.
Why choose a Baracuda Pool Set from WIN WIN POOL
What's in the set
Baracuda Aquantis+ 150M
1.5 HP pool pump · 1 unit- 1.5 HP motor, 230 V
- Flow rate 19.5 m³/h at 10 m head
- Large debris strainer basket
- Easy-maintenance design with motor overheat protection
Baracuda Crystal Wave CWS-T750
Ø750 mm fibreglass filter · 1 unit- 750 mm diameter
- Rated flow 22 m³/h
- Top-mount multiport valve, 2-inch connections
- Fibreglass and polyester resin construction, corrosion resistant and suited to saltwater pools
Baracuda ZenQua Next 30
30 g/h salt chlorinator · 1 set- Chlorine output 30 g/h
- Automatic polarity reversal for self-cleaning
- Rated cell life 8,000-10,000 hours
- Flow detection and low-salt alert
- Adjustable output: 0%, 50%, 75% and 100%
- Pool Cover Mode reduces output when the pool is covered
AstralPool Active Clear Glass
Glass filter media · 250 kg total- Fine grade 0.5-1.0 mm, 25 kg × 8 bags (200 kg)
- Coarse grade 1.0-3.0 mm, 25 kg × 2 bags (50 kg)
- Two grades to the CWS-T750 spec: coarse media at the bottom, fine media on top
Why Active Clear Glass
Technical data
| Pool size for this set | 90-100 m³ |
|---|---|
| Target turnover | 6-8 hours |
| Approx. flow rate required | 11.25-16.67 m³/h |
| Pump flow rate | 19.5 m³/h at 10 m head |
| Filter rated flow | 22 m³/h |
| Chlorine output | 30 g/h |
| Total glass media | 250 kg (200 kg fine + 50 kg coarse) |
| Brand | Baracuda A Fluidra Brand, Spain |
Terms and notes
- Actual flow depends on pipe runs, pressure losses and installation conditions.
- The right chlorinator run time and output depend on bather load, sunlight and water conditions.
- This is an equipment set only. Installation, pipework, valves, control panel and other fittings are not included unless stated in the quotation.
- Other promotions are subject to company terms.
How the system works
Pump draws water
The Aquantis+ 150M pulls water from the pool through the skimmers and suction lines.
Filter traps debris
Water passes through the two layers of glass media in the CWS-T750, where debris is captured.
Chlorinator sanitises
The ZenQua Next 30 produces chlorine from the salt in the filtered water.
Clean water returns
Filtered, sanitised water flows back to the pool through the return inlets.
Who it's for
Ideal for pools holding 90-100 m³ of water (width × length × average depth), from large home pools to mid-size commercial pools that want soft, easy-care water.
Installation notes
- Install in this order: pump filter salt chlorinator, with the salt cell as the last item before water returns to the pool.
- Fill the filter about halfway with water, add the 1.0-3.0 mm coarse grade (50 kg) as the base layer, then the 0.5-1.0 mm fine grade (200 kg), as the filter manual describes.
- Backwash the new media before normal filtration to flush out fine dust.
- Add salt as specified in the ZenQua Next manual for your pool volume, then run the pump until it has dissolved evenly before switching on the chlorinator.
- Electrical work should be done by a qualified electrician, with a residual-current breaker (RCBO/RCD) and proper earthing.
Maintenance
- Test pH 12 times a week and keep it around 7.2-7.6 so the chlorine works effectively.
- When the salt alert shows, check and top up salt as the manual advises, especially after heavy rain or adding fresh water.
- Set output to 50% / 75% / 100% to suit bather load and sunlight, and use Pool Cover Mode when the pool is covered.
- Backwash when the pressure gauge reads noticeably higher than when the media was clean.
- Polarity reversal reduces scale on the cell, but still inspect it periodically per the manual, and empty the pump basket regularly.
Frequently asked questions
Let our team check your pool before you order
Send your pool size and a photo of your equipment room on LINE to confirm the Baracuda 90100Q set is right for your pool, or ask for a quotation including installation.
WIN WIN POOL Everything For Your Pool
Complete swimming pool equipment specialists www.winwinpoolshop.com
Related Products
EMAUX Saltwater Pool Equipment Set for 70–80 m³ Pools
EMAUX Saltwater Pool Equipment Set for 40–60 m³ Pools
EMAUX Saltwater Pool Equipment Set for 10–30 m³ Pools (EMAUX Pool Set 10–30Q)
Baracuda Saltwater Pool Equipment Set for 110–130 m³ Pools
