-5%

WINWINPOOL POOL PAINT SYSTEM 50SQ–120 MICRONS

Name: WINWINPOOL POOL PAINT SYSTEM 50SQ–120 MICRONS
Brand: WINWINPOOL
SKU: WWP-PS50-120
Price: 18638.00 THB
Availability: InStock

SKU : WWP-PS50-120

0 Sold

no reviews

฿19,616

฿18,638

Quantity

Short Description

ชุดสีทาสระว่ายน้ำ WINWINPOOL สำหรับสระคอนกรีตหรือปูนฉาบ พื้นที่ทาสีรวมประมาณ 50 ตารางเมตร เป็นระบบสี 3 ชั้น ประกอบด้วยสีรองพื้นอีพ็อกซี่ใส 1 ชั้น และสีทับหน้าโพลียูรีเทน 2 ชั้น

ควบคุมความหนาฟิล์มแห้งเป้าหมายประมาณ 40 ไมครอนต่อชั้น รวมความหนาทั้งระบบประมาณ 120 ไมครอน มาพร้อมทินเนอร์สำหรับสีรองพื้น ทินเนอร์สำหรับสีทับหน้า และเครื่องวัดความชื้นพื้นคอนกรีตดิจิทัล

รายการสินค้าในชุด รวม 13 ชิ้น

Brands: WINWINPOOL

Categories: สีทาสระ

Product description

Download

WINWINPOOL · Everything For Your Pool

WINWINPOOL 3-Coat Swimming Pool Paint System 120 Microns for approx. 50 m²

WINWINPOOL POOL PAINT SYSTEM 50SQ120 MICRONS

A coating system for concrete or rendered pools: 1 coat of epoxy primer + 2 coats of polyurethane topcoat, with matched thinners and a digital concrete moisture meter. 13 pieces in total.

~50 m²

Total painted area

3 coats

1 primer + 2 topcoat

120 microns

Total dry film thickness

13 pieces

Complete kit

Product Details

WINWINPOOL POOL PAINT SYSTEM 50SQ120 MICRONS is a swimming pool paint kit for a total painted area of approx. 50 m², designed for concrete or rendered pools with correctly prepared surfaces.

The system consists of 1 coat of Concrete Sealer epoxy primer and 2 coats of Unithane W-4000 polyurethane topcoat, with a target of approx. 40 microns per coat about 120 microns total when dry.

The 50 m² covers the pool floor, walls, steps, benches and every other surface to be painted not just the water surface area.

Key Benefits

Complete 3-coat system in one kit1 coat of epoxy primer + 2 coats of polyurethane topcoat

Approx. 120 microns total thicknessTarget 40 microns per coat × 3 coats

Simple A:B = 4:1 mixingBoth products mix at 4:1 by volume

Thinners matched to each coatingW-M68 for the primer, W-M22 for the topcoat

Digital moisture meter includedCheck the surface before starting and before every coat

Full job-control guidanceDrying-time table, work plan and site QC record

Who Is It For?

New concrete or rendered pools At least 28 days old, or fully dry and sound

Existing pool renovation Remove all blistered, cracked or flaking old paint; sand well-bonded old paint to a matte, keyed finish

Total painted area of approx. 50 m² Including floor, walls, steps, benches and all parts to be painted

Technicians, contractors and pool owners Who want a kit with thickness targets and a site record form

Standard Kit Contents (13 Pieces)

Item	Size per set	Qty	Function	Product code
Concrete Sealer 2 Part Clear epoxy primer	3.785 L A 3.028 + B 0.757	2 sets 4 cans	1 primer coat	FBCSLG0000-W
UNITHANE W-4000 Polyurethane topcoat	3.000 L A 2.400 + B 0.600	3 sets 6 cans	2 topcoats
Thinner W-M68	1 gallon 3.785 L	1 can	Viscosity adjustment and primer tool cleaning	FBT68G68-W
Thinner W-M22	1 gallon 3.785 L	1 can	Viscosity adjustment and topcoat tool cleaning	FBT22G22-W
Digital concrete moisture meter		1 unit	Checks the surface before starting and before every coat

13 pieces: 4 Concrete Sealer cans + 6 W-4000 cans + 2 thinner cans + 1 moisture meter

Recommended extra: 1 wet film thickness comb, 20370 microns, for measuring immediately after rolling each coat (not included in the 13 pieces unless stated in the quotation).

The 3-Coat System

Coat 3

UNITHANE W-4000 · final topcoat

~40 µm · Thinner W-M22

Coat 2

UNITHANE W-4000 · first topcoat

~40 µm · Thinner W-M22

Coat 1

Concrete Sealer 2 Part · clear epoxy primer

~40 µm · Thinner W-M68

Substrate

Concrete / render · prepared and within moisture limits

Moisture 4%*

Target total dry film thickness 40 × 3 = approx. 120 microns

How to Calculate Area and Number of Sets

Rectangular pool area

Floor = length × width
2 long walls = 2 × length × average depth
2 short walls = 2 × width × average depth
Total area = floor + walls + steps + benches + other painted parts

Concrete Sealer primer (1 coat)

Area for 1 coat: 50 m²
Theoretical at 40 µm: ~52 m² per set per coat
Supplied: 2 sets to allow for concrete absorption and roughness

W-4000 topcoat (2 coats)

Area for 2 coats: 50 × 2 = 100 m²
Theoretical at 40 µm: ~41 m² per set per coat
Supplied: 3 sets covering 100 m² of application with an allowance for losses

Estimating formula: number of sets = area to be coated ÷ practical coverage per set per coat, rounded up to whole sets. On site, use a practical coverage of 3040 m² per set per coat to allow for roughness and losses. If the surface is very rough, has many steps, or the actual area exceeds 50 m², recalculate before starting.

Controlling Thickness per Coat

Target wet film (volume solids ~55 ± 2%)

Dry film (DFT)	Volume solids	Wet film (WFT)
30 µm	55%	55 µm
40 µm (target)	55%	73 µm
50 µm	55%	91 µm

WFT = DFT ÷ Volume Solids
Example: 40 ÷ 0.55 = 72.7 microns

Using a wet film comb

Roll a test area that matches the real surface
Press the comb vertically into the wet paint straight away, with the teeth touching the substrate
Lift it straight out and read between the last wetted tooth and the next dry tooth
Measure at least 5 points per area, and more at corners, steps and rough surfaces
Adjust pressure, roller or paint load until readings are close to target never let paint pool

Surface Acceptance and Moisture Checks

Surface acceptance before starting

New concrete should be at least 28 days old, or fully dry and sound
Free from dust, friable render, oil, grease, curing compounds, algae, efflorescence and contaminants
Remove all blistered, cracked or flaking old paint; sand well-bonded old paint to a matte, keyed finish
Repair cracks, pinholes, voids and joints; repair materials must be cured and dry as specified
Abrade the surface to an even profile, then vacuum or remove all dust
After washing or pressure-washing, wait until completely dry before checking moisture and painting

Moisture and environment limits

Check	Limit
Concrete surface moisture	4% (meters reading % for concrete) or per the meter manufacturer
Air relative humidity	85%
Surface temperature	Above 10°C and at least 3°C above dew point
Surface condition	Dry no droplets, ponding, dew or trapped moisture

Measure and record before the primer, before topcoat 1 and before topcoat 2, at several points floor, walls, corners, steps, low spots and areas where water has ponded. For relative-scale meters, compare against a dry reference area and do not paint any area reading abnormally high until the cause is found and it is dry.

Mixing and Using Thinners

Concrete Sealer 2 Part (primer)

Stir Part A, add Part B at A:B = 4:1 by volume, and mix down to the bottom and sides of the container
Add Thinner W-M68 only after mixing A+B, 05% by volume if needed
Use the mix within approx. 4 hours at 30°C

UNITHANE W-4000 (topcoat)

Stir Part A and add Part B at A:B = 4:1 by volume
Add Thinner W-M22 only after mixing, 010% if needed
Mix a fresh batch for the final coat never use leftover paint from coat 2

Important don'ts

Never swap thinners: W-M68 is for the primer only, W-M22 for the topcoat only
Do not split kits by estimation; if you must, use accurate measuring containers and keep the 4:1 ratio
Do not over-thin it causes thin film, lower coverage and slower curing
Discard mixed paint past its pot life; never add thinner to revive it

3-Coat Application Procedure

Accept the surface and check moisture

Inspect the surface against the criteria, measure moisture and conditions at several points, and record readings before starting.

Coat 1 Concrete Sealer primer

Stir Part A, add Part B at 4:1 and mix to the bottom and sides. Add W-M68 05% after mixing if needed. Apply continuously by roller, brush or spray. Use within ~4 h at 30°C; never thin paint that has started to harden.

WFT ~73 µmRecoat after 14 h (23°C)

Coat 2 W-4000 first topcoat

Wait for the minimum recoat time, and check the primer is dry, sound and clean. Lightly sand if glossy or past the recoat window, then remove dust. Re-check moisture do not paint if dew or moisture returns. Mix 4:1 and add W-M22 010% if needed.

WFT ~73 µmRecoat after 3 h (23°C)

Coat 3 W-4000 final topcoat

Wait for the minimum recoat time, lightly sand the whole surface to aid inter-coat adhesion, remove all dust and re-check moisture. Mix a fresh 4:1 batch, apply evenly, and correct roller marks, pooling or runs before it starts to set.

WFT ~73 µmCure 5 days before filling (23°C)

Times referenced at approx. 23°C see the drying-time table below for other temperatures.

Drying and Recoat Times

Product and stage	10°C	23°C	40°C
Concrete Sealer touch dry	8 h	4 h	2 h
Concrete Sealer recoat after at least	48 h	14 h	5 h
W-4000 touch dry	2 h	1 h	30 min
W-4000 recoat after at least	6 h	3 h	1 h 30 min
W-4000 full cure before filling	10 days	5 days	2 days

Times are approximate. Thick films, low temperature, high humidity, heavy thinning or poor ventilation slow drying and curing always check actual conditions before the next coat and before filling.

Example Work Plan at approx. 23°C

Stage	Approx. duration	Key check
Surface prep and repairs	Depends on site	Sound, clean, dry and dust-free
Primer	Working day 1	Moisture passes · WFT ~73 µm
Wait before topcoat	At least 14 hours	Dry and uncontaminated
W-4000 coat 1	Working day 2	Sand and clean · WFT ~73 µm
Wait before final coat	At least 3 hours	Dry · re-check moisture
W-4000 final coat	Working day 2	WFT ~73 µm · inspect finish
Cure before filling	At least 5 days	No contact with water or chemicals

Site Quality Control Record

Coat	Date & time	Moisture	Surface temp.	RH	WFT	Inspector
Primer
Topcoat 1
Topcoat 2

Print or copy this table to record site readings for every coat.

Cleaning and Waste Handling

Clean primer tools with W-M68 and W-4000 tools with W-M22 immediately after use
Never leave mixed paint in rollers, spray equipment, hoses or containers to harden
Never pour paint, thinner or wash water into drains, waterways or soil
Store waste in closed containers and dispose of it according to local regulations

Safety Precautions

Products and thinners are flammable keep away from flames, sparks and heat, and no smoking in the work area
Provide good ventilation, especially inside the pool, a low area where vapours can accumulate
Wear chemical-resistant gloves, safety goggles, protective clothing and a suitable organic-vapour respirator
If in eyes, rinse with clean water for at least 15 minutes and see a doctor. If swallowed, do not induce vomiting and seek medical help immediately
Do not paint on wet surfaces, in rain, or when rain, dew or rising groundwater is likely

Acceptance Criteria Before Filling

Item	Acceptance criteria
Curing	Complete for the actual temperature at least 5 days at approx. 23°C
Film appearance	Even colour; no blisters, peeling, cracks, pooling, pinholes or abnormally thin areas
Cleanliness	No dust, oil, debris or chemical residue
Filling	Fill continuously to operating level; avoid long pauses that leave a waterline mark
Starting the water system	Balance water chemistry gradually, following your pool technician's advice

Frequently Asked Questions

What area does this kit cover?

A total painted area of approx. 50 m², including the floor, walls, steps, benches and all parts to be painted not the water surface area. If the actual area exceeds 50 m², recalculate before starting.

What is the difference between the 120-micron and 160-micron systems?

This kit is 3 coats (1 primer + 2 topcoat) for approx. 120 microns total. The 160-micron system is 4 coats (2 primer + 2 topcoat). Ask our team which suits your pool.

What is the mixing ratio?

Both Concrete Sealer and W-4000 mix at A:B = 4:1 by volume. Mix down to the bottom and sides of the container.

How much thinner can I add?

Concrete Sealer: W-M68 at 05%. W-4000: W-M22 at 010% by volume. Add only after mixing A+B, and only when needed.

When must I check moisture?

Before the primer, before topcoat 1 and before topcoat 2, at several points. Surface moisture 4%, RH 85%, surface temperature above 10°C and at least 3°C above dew point.

Do I need to sand between coats?

Before the first topcoat, lightly sand if the primer is glossy or past its recoat window. Before the final coat, lightly sand the whole surface for adhesion. Remove all dust each time.

How long before I can fill the pool?

Approx. 10 days at 10°C, 5 days at 23°C and 2 days at 40°C and the finish must pass the acceptance criteria.

Is a wet film thickness comb included?

No. It is a recommended extra (20370 microns), not part of the 13 pieces unless stated in the quotation.

Can the paint fix leaks or structural problems?

No. The kit does not fix structural problems, leaks, groundwater pressure or concrete movement. These must be resolved before starting the coating system.

Technical note: Thickness, coverage, drying and curing values are targets and job-control guidance. Actual results depend on the substrate, temperature, humidity, ventilation, mixing, equipment and workmanship. Trial a small area before the full job and record site readings for every coat.

Want to check the right paint quantity for your pool?

Send us your pool's width × length × depth or photos of the surface, and our team will calculate the area and recommend a kit.

Call 02-989-1111 LINE @winwinpool

Ratings & Reviews

There are no ratings and reviews yet. Be the first to comment.

This website uses cookies to enhance performance and provide you with a better user experience. You can read more details at: Privacy Policy and Cookies Policy