Thinner M-68 for Epoxy (2-Component System)

Premium Thinner for Epoxy Coatings

High-quality thinner designed for mixing and diluting 2-component epoxy coatings. Helps reduce viscosity for smoother application, improves brush and roller flow, and enhances work efficiency. Also suitable for cleaning painting tools and equipment.

Key Features:

• Premium-grade thinner for epoxy coatings
• Reduces viscosity for smooth application
• Improves brush and roller performance
• Saves time and enhances work efficiency
• Suitable for all 2-component epoxy systems
• Effective for cleaning tools and equipment

Applications:

Designed for use with epoxy primers and heavy-duty coatings such as concrete sealers, especially for swimming pool surface preparation before topcoat application.

Mixing Instructions:

• For brush/roller application: dilute 010% by volume
• For spray application: dilute 1015% by volume
• Mix epoxy Part A and Part B according to product ratio before adding thinner
• Stir thoroughly until uniform
• Add thinner gradually if viscosity increases during application

Application Conditions:

• Surface temperature should be above 10°C
• At least 3°C above dew point
• Relative humidity should not exceed 85%
• Ensure good ventilation during application and drying
• Avoid moisture on surface before coating

Storage & Handling:

• Store in a cool, dry, well-ventilated area
• Keep away from heat, sparks, and open flames
• Keep container tightly closed
• Handle with care during transportation

Packaging:

1 Gallon (3.8 Liters)

Precautions:

• Keep out of reach of children
• Avoid contact with skin and eyes
• Do not store near heat or direct sunlight
• Keep away from water and moisture
• Do not return unused material back into original container
• If contact occurs, wash immediately with water and soap
• If eye contact occurs, rinse thoroughly and seek medical attention