Share

Why Every Swimming Pool Needs 90% Chlorine?

Last updated: 6 Dec 2025
1543 Views

Why Every Swimming Pool Needs 90% Chlorine:

The Fastest and Most Reliable Sanitizer
Todays swimming pools come with many different treatment systemssaltwater, mineral systems, ionizers, oxidation, coppersilver, ultrasonic, ozone, UV, and various health-focused systems. While these systems offer additional benefits, many people misunderstand them as replacements for chlorine.

The truth is simple:
All of these systems are secondary sanitizers. They cannot replace chlorine as the primary, fast-acting disinfectant.


What Is 90% Chlorine and Why Is It So Effective?
90% chlorine (such as TCCA) is a highly concentrated form of chlorine known for its rapid disinfection ability. It can kill bacteria, viruses, algae, and most microorganisms within seconds to minutes.

The World Health Organization (WHO) recognizes chlorine as one of the few sanitizing methods proven to eliminate pathogens quickly and effectively in swimming pools worldwide.


Why Chlorine Is Essential for Every Pool System


Even if your pool uses a premium or chemical-free treatment system, chlorine is still necessary because:

1. Secondary systems cannot kill germs fast enough
Salt systems, ozone, UV, ionizers, and mineral systems work slowly. They do not neutralize new contaminants immediately.

2. Some pathogens can only be destroyed by chlorine
Certain bacteria and viruses are resistant to alternative systems but can be killed quickly by chlorine.

3. Chlorine is your emergency solution
If the water becomes cloudy, smelly, or overloaded with swimmers, chlorine is the only sanitizer that restores water quality fast.

4. It is globally accepted for safety
Chlorine has decades of scientific data supporting its effectiveness and remains the most trusted method for pool sanitation.


How Much Chlorine Should Be Maintained?


For pools using health-oriented or alternative systems, maintain a minimum of 0.5 ppmthe same level found in standard tap water.
This small amount ensures rapid protection against new contaminants without causing strong odor or irritation.


Conclusion
90% chlorine remains the most effective and fastest disinfectant approved for swimming pools. Every poolsalt, mineral, ionizer, ozone, UV, or freshwaterstill needs chlorine as the primary sanitizer. Keeping chlorine in stock at home ensures safety, cleanliness, and immediate treatment in emergencies. Maintain at least 0.5 ppm to protect swimmers and keep your water healthy.

Shopping Chlorine for your pool


Related Content
Why You Should Never Use Exposed Aggregate (Washed Sand Finish) Inside a Swimming Pool
Why You Should Never Use Exposed Aggregate (Washed Sand Finish) Inside a Swimming Pool Using exposed aggregate or washed sand finish inside the pool is strongly discouraged because chlorine and pool chemicals gradually erode the surface, causing sand particles to loosen and detach. These particles are then carried by the water flow into the filtration system, where they often get stuck in the pump impeller, leading to wear, reduced performance, and costly pump damage. Additionally, exposed aggregate surfaces retain algae, are difficult to clean, and the rough texture may cause scratches or abrasions to swimmers. As the surface deteriorates, loose particles make the pool water cloudy and increase the frequency of maintenance, driving up long-term operating costs. ✅ Recommendation
 “Salt Chlorinator Cell Housing Cracked… The Real Cause Is NOT a Bad Machine — It’s When the Unit Runs Without Water Flow!” Many pool owners experience this and get shocked…
A cracked or burst salt chlorinator cell housing is a problem that shocks many pool owners. The chlorinator appears to be running normally, but suddenly you hear a loud “pop,” followed by water leaking from the system. Many people assume the unit is low quality, but in most cases, the real cause is not the machine itself — it is when the salt chlorinator continues operating without actual water flow through the cell. Even when water is not flowing, salt water may still remain trapped inside the cell housing. If the chlorinator keeps producing chlorine from this trapped water, chlorine quickly turns into chlorine gas. The gas pressure builds up rapidly inside the housing, which can eventually crack or explode the clear plastic outer chamber. The most common situations include: (1) closing the inlet and outlet valves during pool vacuuming to prevent sediment from entering the cell, then forgetting to reopen them; and (2) running filter backwash in AUTO mode where the pump and chlorinator operate together, but the water flows directly to the waste line instead of passing through the cell. This issue is especially common in models that use electrode-type water sensing, which can be inaccurate when water is trapped but not flowing. The best solution is choosing a salt chlorinator with a real Flow Switch, such as the Laswim SR Series. A Flow Switch instantly stops operation when there is no real water flow, significantly reducing the risk of cracking, leakage, and costly repairs while extending the equipment lifespan.
icon-messenger
This website uses cookies to enhance performance and provide you with a better user experience. You can read more details at: Privacy Policy and Cookies Policy