Share

Why You Should Never Use Exposed Aggregate (Washed Sand Finish) Inside a Swimming Pool

Last updated: 4 Dec 2025
327 Views

Why You Should Never Use Exposed Aggregate (Washed Sand Finish) Inside a Swimming Pool


Choosing the right interior finish for a swimming pool is crucial for safety, durability, and long-term maintenance costs. While exposed aggregate or washed sand finish is popular for outdoor walkways or poolside areas, it is highly unsuitable for the interior of a swimming pool for several important reasons.


1. Chemical Erosion From Chlorine and Pool Treatments
Washed sand surfaces are not designed to withstand strong pool chemicals. Over time, chlorine and other sanitizers corrode the surface, causing sand particles to detach from the finish. This leads to rapid surface deterioration and uneven texture that worsens with continued exposure.


️ 2. Detached Sand Damages the Pump and Filtration System
Once sand particles break loose, pool circulation carries them into the filtration system, where they often lodge inside:

The pump impeller
The mechanical seal
Valves and piping
Accumulated sand causes impeller wear, reduced water flow, pressure loss, noisy operation, and eventually pump failureresulting in expensive repairs or replacement.


3. High Tendency to Trap Dirt and Algae
The rough, porous texture of exposed aggregate easily traps:

Algae
Stains
Sediment
This makes cleaning significantly more difficult. Even with regular brushing, the surface often remains discolored and can make the pool appear dirty despite proper chemical levels.


4. Rough Surface Can Cause Injuries
The abrasive nature of washed sand can cause:

Scratches
Cuts
Skin irritation
This is especially concerning for children, swimmers, and elderly pool users.


5. Higher Long-Term Maintenance Costs
Because the surface deteriorates faster and creates more operational problems, owners face increased expenses for:

Frequent system flushing
Higher chemical usage
Early pump or filter replacement
Premature resurfacing of the pool
The long-term cost is significantly higher than using proper pool-grade materials.


Recommended Materials for Pool Interiors
For durability and ease of maintenance, choose materials specifically engineered for underwater use, such as:

High-quality mosaic tiles
Porcelain or ceramic pool tiles
Epoxy or pool-coating finishes
Vinyl liner systems (for compatible structures)
These materials resist chemical damage, maintain visual appeal, and protect pool equipment.


⭐ Conclusion
Exposed aggregate is suitable around the poolbut never inside it. It leads to chemical erosion, equipment damage, algae buildup, injuries, and unnecessary long-term expenses. Choosing the correct interior finish ensures a beautiful, durable, and easy-to-maintain swimming pool.

Tags :
exposed aggregate pool finish
washed sand pool surface
why not use sand finish in pool
pool pump damage
sand in pump impeller
pool surface problems
pool maintenance issues
swimming pool materials
better pool finishes
winwinpool
Related Content
“Salt Chlorinator Cell Housing Cracked… The Real Cause Is NOT a Bad Machine — It’s When the Unit Runs Without Water Flow!” Many pool owners experience this and get shocked…
“Salt Chlorinator Cell Housing Cracked… The Real Cause Is NOT a Bad Machine — It’s When the Unit Runs Without Water Flow!” Many pool owners experience this and get shocked…
A cracked or burst salt chlorinator cell housing is a problem that shocks many pool owners. The chlorinator appears to be running normally, but suddenly you hear a loud “pop,” followed by water leaking from the system. Many people assume the unit is low quality, but in most cases, the real cause is not the machine itself — it is when the salt chlorinator continues operating without actual water flow through the cell. Even when water is not flowing, salt water may still remain trapped inside the cell housing. If the chlorinator keeps producing chlorine from this trapped water, chlorine quickly turns into chlorine gas. The gas pressure builds up rapidly inside the housing, which can eventually crack or explode the clear plastic outer chamber. The most common situations include: (1) closing the inlet and outlet valves during pool vacuuming to prevent sediment from entering the cell, then forgetting to reopen them; and (2) running filter backwash in AUTO mode where the pump and chlorinator operate together, but the water flows directly to the waste line instead of passing through the cell. This issue is especially common in models that use electrode-type water sensing, which can be inaccurate when water is trapped but not flowing. The best solution is choosing a salt chlorinator with a real Flow Switch, such as the Laswim SR Series. A Flow Switch instantly stops operation when there is no real water flow, significantly reducing the risk of cracking, leakage, and costly repairs while extending the equipment lifespan.
Leaving Home for 7-10 Days During the New Year How to Maintain Your Swimming Pool So Its Clear and Ready to Swim When You Return
Leaving Home for 7-10 Days During the New Year How to Maintain Your Swimming Pool So Its Clear and Ready to Swim When You Return
The New Year holiday is a time when many families travel to other provinces or overseas, leaving their homes unoccupied for several days. For homeowners with swimming pools, this often leads to concerns that the water may turn green, develop unpleasant odors, or require costly cleaning and water replacement upon return. In reality, closing a swimming pool for 7–10 days is not difficult if the correct water care principles are applied. The key is proper water preparation before leaving, using the right chemicals to work in place of daily maintenance. This approach helps control algae growth, bacteria, and the accumulation of dirt during periods when the pool is not in use. This one-time, 10-day pool care method is designed for residential pools and can be applied to both homes without automatic control systems and those equipped with Smart Home or Smart App monitoring. It allows pool owners to reduce system operation while still maintaining stable water quality throughout the holiday period. When chemicals are selected correctly and adjusted according to pool size, homeowners can return from their trip to find clear, clean water. With minimal effort—such as vacuuming settled debris—the pool is ready for immediate use, eliminating the need for draining or refilling and ensuring a stress-free return home.
⭐ **WATERSTOP for Swimming Pool Construction Selection Guide + Specifications (Winwinpool Standard by Pool Size & Concrete Thickness)**
⭐ **WATERSTOP for Swimming Pool Construction Selection Guide + Specifications (Winwinpool Standard by Pool Size & Concrete Thickness)**
⭐ How to Choose the Right Waterstop for Swimming Pools Selecting the proper waterstop is essential for preventing leakage through concrete joints in swimming pool structures, including floor-to-wall joints, construction joints, and areas with structural movement such as expansion joints. Choosing the correct size and thickness helps ensure long-term waterproofing performance and extends the overall lifespan of the pool. The selection should always match the thickness of the pool wall or slab. For example, 6-inch waterstops are suitable for 15–20 cm concrete walls, while 8-inch models are recommended for 20–25 cm walls. Rib design and thickness are equally important: triple-rib models provide stronger anchorage and are ideal for high-pressure or movement-prone areas, whereas double-rib models suit general construction joints. Winwinpool classifies its waterstops into six types—Type A, AA, B, BB, C, and CC—allowing engineers, contractors, and homeowners to select the most appropriate model according to structural requirements and pool design standards.
icon-messenger
เว็บไซต์นี้มีการใช้งานคุกกี้ เพื่อเพิ่มประสิทธิภาพและประสบการณ์ที่ดีในการใช้งานเว็บไซต์ของท่าน ท่านสามารถอ่านรายละเอียดเพิ่มเติมได้ที่ Privacy Policy and Cookies Policy
Compare product
0/4
Remove all
Compare