หุ่นยนต์ดูดสระทั่วไปติดปัญหาอะไร และทำไม Aiper Scuba V3 กับ EcoSurfer S2 ถึงแก้ได้

Last updated: 7 Nov 2026

39 Views

หุ่นยนต์ดูดสระ Aiper Scuba V3 และสกิมเมอร์พลังงานแสงอาทิตย์ EcoSurfer S2 ในสระว่ายน้ำ

Swimming Pool Knowledge & Insights

Common Robotic Pool Cleaner Problemsand How the Aiper Scuba V3 and EcoSurfer S2 Solve Them

Some robotic pool cleaners still follow navigation patterns that do not directly detect dirty areas, and they cannot collect leaves floating on the water's surface. This article explores common problems and explains how the Aiper Scuba V3 and EcoSurfer S2 work together to clean the pool floor, walls, waterline, and surface.

THE ROOT CAUSES

7 Common Problems with Conventional Robotic Pool Cleaners

Problems vary by model and pool conditions, but the main concerns are navigation, filtration, retrieval, and cleaning coverage.

NavigationRandom movement and bump-and-turn navigationThe robot cannot determine its location, repeatedly covers the same areas, and misses some corners.

DetectionCannot identify dirty areasIt spends equal time on clean areas and piles of leaves, potentially running out of battery before reaching areas that need cleaning.

Operating TimeIneffective nighttime cleaningSomeone may need to start and stop the cleaner during the day, leaving the pool unprepared in the morning.

ConvenienceDifficult to retrieve and heavy to liftThe robot stops on the pool floor and must be retrieved with a hook. Some models weigh 1015 kg when water remains inside.

DurabilityRequires a wired charging connectionCharging ports can provide an entry point for water and are a potential failure point for underwater devices.

FiltrationFine sediment escapes back into the poolA 150200-micron basket captures leaves, but fine dust and sand may pass back into the water, causing cloudiness.

Water SurfaceDoes not clean the water surfaceFloating leaves eventually sink, releasing organic matter and increasing chlorine demand. Built-in skimmers collect debris only when the pool pump is running.

SEE THE DIFFERENCE

Different Cleaning Paths in the Same Pool

Illustration 2: Conventional robot cleaning route — **Conventional Robot** moves randomly, overlaps its paths, and leaves debris in corners.

Illustration 3: Scuba V3 planned cleaning route — **Scuba V3 (VisionPath)** plans routes using an AI camera and dToF to cover the pool floor with less unnecessary repetition.

Aiper Scuba V3

A Floor-Cleaning Robot That Sees and Plans Its Own Route

Aiper unveiled the Scuba V3 at IFA Berlin 2025 and launched it internationally in early 2026. Its technologies are designed to address the problems described above.

Aiper Scuba V3 uses an AI camera to detect debris on the pool floor — AI Patrol: The camera detects debris on the pool floor and directs the robot to the areas that need cleaning.

Random movement and bump-and-turn navigation

VisionPath (AI Camera + dToF)dToF measures the time it takes for emitted light to reflect back, similar to laser distance sensing, helping the robot plan floor coverage and avoid obstacles.

Cannot identify dirty areas

AI Patrol CleaningDetects debris up to 2 meters away, identifies more than 20 types, and redirects the robot to collect it. Aiper claims detection and cleaning can be up to 10 times faster.

Requires manual scheduling

Cognitive AI NaviumUses pool size, weather conditions, and cleaning history to create a weekly cleaning plan for continuous seven-day care.

Cannot see at night

Dual Front LED LightsIlluminate the path so the AI camera can operate at night, helping keep the pool clean by morning.

Heavy and difficult to retrieve

8.2 kg + Automatic Waterline ParkingAfter cleaning, the robot moves to the pool edge and the app sends a retrieval notification, making it easier to lift out with one hand.

Wired charging and water entering the port

Wireless Charging DockSimply place the robot on the dock to charge, with no exposed charging port for water to enter.

Fine sediment escapes back into the pool

3-Micron Multilayer MicroMesh FiltrationCombined with 4,800 GPH suction flow (approximately 18,000 liters/hour) and dual brushes.

Waterline stains remain

JetAssistThe robot climbs to the waterline and uses jet propulsion to move horizontally, scrubbing along the waterline.

Scuba V3 parks at the waterline and sends an app retrieval notification — After cleaning, it parks at the waterline and sends an app notification, eliminating the need to hook it from the pool floor.

AI Navium plans seven days of pool maintenance based on weather conditions — AI Navium creates a seven-day pool maintenance plan using weather conditions and cleaning history.

Pool-camera privacy: Aiper has received TÜV certification for data protection. According to Aiper, the device does not store or upload images. In a Digital Trends review, the tester scattered dirt and leaves on the pool floor; the robot redirected itself to clean them before resuming its planned route. Digital Trends awarded it Editors' Choice.

PARTICLE SIZE

How Fine Is 3-Micron Filtration?

Aiper EcoSurfer S2

Collect Leaves Before They Sinkwith Solar-Powered Surface Cleaning

Robotic cleaners designed for underwater cleaning generally cannot collect leaves while they are still floating. The EcoSurfer S2 fills this gap by patrolling the water surface and collecting debris. It also received the Red Dot Design Award 2025.

EcoSurfer S2 collects leaves on the water surface while Scuba V3 cleans the pool floor — The solar-powered EcoSurfer S2 collects surface debris while the Scuba V3 cleans the pool floor.

Complete pool cleaning coverage: surface, walls, waterline, and floor — The two robots divide the work: water surface, walls, waterline, and pool floor.

SolarSeeker Automatically Finds SunlightWhen the battery runs low, the robot moves to a sunny area, charges for about 15 minutes, and then resumes cleaning.

35-Hour Battery RuntimeWith a full charge via the adapter and supplementary solar charging, it is designed for 24/7 operation, including on days with limited sunlight.

Operates Independently of the Pool PumpA built-in wall skimmer operates only when the pump is running, while the S2 independently patrols the entire water surface.

150-Micron Filtration + DebrisGuardA barrier closes the inlet when the robot reverses, helping prevent collected debris from escaping. The debris basket holds 4 liters.

3-Inch Chlorine Tablet DispenserThe dispensing rate is adjustable, distributing chlorine along the robot's travel path.

Dual Optical SensorsCombined with Anti-Stranding and Self-Rescue features to avoid getting stuck in corners; suitable for rectangular and freeform pools.

SIDE-BY-SIDE COMPARISON

Comparing Conventional Cleaning Methods with the Aiper Experts Duo

Feature	Conventional Robotic Pool Cleaner	Aiper Scuba V3	Aiper EcoSurfer S2
Navigation	Random / bump-and-turn	AI camera + dToF route planning	Dual optical sensors
Debris Detection	None	20+ types, up to 2 m	Collects floating debris in its path
Nighttime Operation	Limited	Yes (dual LEDs)	Yes, 24/7
Cleaning Areas	Floor (walls on some models)	Floor, walls, and waterline	Water surface
Filtration Fineness	150200 µm	3 µm	150 µm
Charging	Wired charging	Wireless charging dock	Automatic sunlight-seeking solar charging + DC
Retrieval	Hook from the pool floor	Parks at the pool edge + app notification	Floats on the surface
Cleaning Schedule	Manual scheduling	AI Navium seven-day plan	Scheduled cleaning + ECO mode

BEFORE YOU BUY

Practical Limitations to Consider

AI Patrol must first be enabled in the app The default mode follows a cleaning schedule. Enable AI Patrol to access the full AI functionality.
Scuba V3 battery runtime is approximately 150 minutes Suitable for many residential pools, but larger pools and resorts should be assessed by a specialist first.
Pool steps may still need additional cleaning A reviewer found that the robot could climb the first step but sometimes not the second.
Scuba V3 does not skim the surface, and EcoSurfer S2 does not vacuum the floor Pools surrounded by trees may benefit from using both models together.
Wi-Fi signals do not travel effectively through water Complete the app setup before placing the robot in the pool.