SKU : WD1200-25L
0 Sold
no reviews
Quantity
Promotions and Special Offers
Buy products worth every ฿3,000 Get an instant discount 4%
Buy products worth every ฿5,000 Get an instant discount 5%
Buy products worth every ฿20,000 Get an instant discount 6%
Buy products worth every ฿40,000 Get an instant discount 7%
Buy products worth every ฿3,000 Get an instant discount 3% (For Everyone)
Buy products worth every ฿5,000 Get an instant discount 4% (For Everyone)
Buy products worth every ฿20,000 Get an instant discount 5% (For Everyone)
Buy products worth every ฿40,000 Get an instant discount 6% (For Everyone)
Short Description
A 1,206 mm wall-mounted waterfall spillway for pools and decorative water features. Its acrylic outlet forms a smooth sheet of water illuminated by built-in 17 W RGB LEDs. The unit operates on 12 V DC and has a 1½-inch water inlet. A compatible external RGB controller is required and is not included.
A wall-mounted waterfall spillway for pools and decorative water features. The acrylic outlet forms a smooth sheet of water illuminated by a built-in 17 W RGB LED strip. This wired model operates on 12 V DC and requires a compatible external RGB controller, which is not included.

Designed for long-term outdoor installation in residential and commercial projects.
A precision-polished outlet and an internal baffle distribute water evenly across the spillway for a smooth sheet and quiet flow.
The durable ABS housing resists corrosion, rust, and compression. The thick acrylic outlet helps reduce cracking, warping, and leaks.
The built-in 17 W RGB LED strip supports color changes and lighting modes through a compatible external RGB controller.
Multilayer seals, a waterproof cable connector, and a protected LED compartment suit pools, garden waterfalls, fountains, and wet environments.
The light runs on 12 V DC and requires a compatible DC power supply.
The slim, straight outlet sits discreetly against the wall for a clean waterfall line.
Main components include a water deflector, waterproof connector, thick acrylic outlet, high-brightness LEDs, and an ABS housing.

ABS housing, thick acrylic outlet, and built-in LEDs

Multilayer sealing and waterproof cable connector

Nominal size: 1,200 mm · Length A: 1,206 mm

Change colors using a compatible external RGB controller.
| Model | Version | Power | Length A | Voltage |
|---|---|---|---|---|
| WD300-25L | Wiring (no controller) | 4 W | 306 mm | DC 12 V |
| WD300-25L-CKit | All-in-One (controller + remote) | 4 W | 306 mm | DC 12 V |
| WD600-25L | Wiring (no controller) | 8 W | 606 mm | DC 12 V |
| WD600-25L-CKit | All-in-One (controller + remote) | 8 W | 606 mm | DC 12 V |
| WD900-25L | Wiring (no controller) | 12 W | 906 mm | DC 12 V |
| WD900-25L-CKit | All-in-One (controller + remote) | 12 W | 906 mm | DC 12 V |
| WD1200-25LThis Model | Wiring (no controller) | 17 W | 1,206 mm | DC 12 V |
| WD1200-25L-CKit | All-in-One (controller + remote) | 17 W | 1,206 mm | DC 12 V |
| Voltage | DC 12V |
| IP Rating | IP68 |
| LED Type | Epistar SMD2835 |
| Luminous Efficacy | 100 lm/W |
| Light Color | Color-Changing RGB |
| Housing Material | ABS |
| Water Outlet | Thick Acrylic |
| Water Inlet | 1½ in. (nominal) |
| Housing Depth (B) | 138 mm |
| Housing Height (C) | 76 mm |
| Outlet Height (D) | 25 mm |

This wired model uses a 12 V DC power supply and a compatible external RGB controller. The RGB controller is not included.
A compatible controller can support remote operation. Remote functions depend on the controller and remote selected.
Use a 12 V DC power supply suited to the 17 W lighting unit and the selected controller.
App control requires a compatible RGB controller.
The unit is designed to be recessed into a brick or block wall during construction. Connect the pump to the 1.5-inch inlet through a valve.

Install the spillway level across its full length. The manufacturer's drawing shows the outlet extending about 10 mm beyond the finished wall to help produce an even water sheet.
Connect the pump through a flow-control valve. If water pressure is too high, divert excess flow back to the pool or holding tank.
Connect the light to a 12 V DC power supply and controller rated for the total load. Install the control box outside the pool.
Run the pump and adjust the valve until the water forms a smooth sheet. Then test the lighting and controls.

Control box, spillway, water inlet, baffle, LED strip, and outlet

Reference chart for the nominal 300 mm model. Confirm the required flow rate for the 1,200 mm model based on the installation height and pipe layout.
Pools, gardens, ponds, outdoor spaces, spas, and hotels
Decorative water features, spas, and pools
Pool walls and gardens
Large landscape projectsHomes and villas with illuminated pool or garden waterfalls
Hotels, resorts, and spas with nighttime landscape features
Pool and landscape contractors
Architects and designers specifying decorative waterfall walls
Keep water chemistry balanced to reduce scale at the outlet, which can break up the water sheet.
Wipe the acrylic outlet with a soft cloth. Avoid stiff brushes and corrosive cleaners.
Clean the pump basket and filter regularly to keep leaves and debris from clogging the spillway.
Check the cable connector and power supply enclosure periodically. Keep them dry and securely closed.
The nominal size is 1,200 mm. The actual housing length (A) is 1,206 mm. Use dimension A when planning the wall installation.
Pump sizing depends on spillway length, the number of units, the lift height, and the pipe run. Contact our team for help sizing the pump. A flow-control valve lets you adjust the thickness of the water sheet.
The light requires a 12 V DC power supply. Have a qualified electrician install the power supply and residual-current protection.
Connect a compatible external RGB controller to change colors and lighting modes. Remote and app control depend on the controller selected.
Yes. The unit can be installed in new pools and renovations, provided a 1.5-inch water line and electrical wiring can reach the installation point. Our team can help assess the site.
Common causes include an unlevel spillway, flow that is too high or too low, or scale or debris at the outlet. Check the level, adjust the flow valve, and clean the outlet.
Send your wall dimensions or pool drawings to Win Win Pool Shop. Our team can help assess the installation location and select suitable equipment.