Pre Order
-38%

WD300-25L-C 4W RGB LED Waterfall Spillway – Complete Kit with Controller and Remote

SKU : WD300-25L-C

0 Sold

no reviews

฿3,392
฿2,104

Quantity

Promotions and Special Offers

Buy products worth every ฿3,000 Get an instant discount 4%

Buy products worth every ฿5,000 Get an instant discount 5%

Buy products worth every ฿20,000 Get an instant discount 6%

Buy products worth every ฿40,000 Get an instant discount 7%

Buy products worth every ฿3,000 Get an instant discount 3% (For Everyone)

Buy products worth every ฿5,000 Get an instant discount 4% (For Everyone)

Buy products worth every ฿20,000 Get an instant discount 5% (For Everyone)

Buy products worth every ฿40,000 Get an instant discount 6% (For Everyone)

Short Description

The WD300-25L-C is a wall-mounted waterfall spillway with a built-in 4 W RGB LED strip. Its acrylic outlet creates a smooth sheet of water for pools and decorative water features. The unit is 306 mm long and has a 1½-inch water inlet. The kit includes a 12 V DC power adapter, RGB controller, and RF remote for changing colors and lighting modes.

Wishlist
Product description
Download
LED Waterfall Spillway

WD300-25L-C RGB LED Waterfall Spillway
4 W · 306 mm · All-in-One Kit with Controller and Remote

A wall-mounted waterfall spillway for pools and decorative water features. Its acrylic outlet forms a smooth sheet of water illuminated by a built-in 4 W RGB LED strip. The light runs on 12 V DC through the included power adapter. An RGB controller and RF remote are included.

Length A: 306 mm IP68 Waterproof DC 12V Color-Changing RGB 1.5-inch Water Inlet
WD waterfall spillway with RGB remote on a pool wall

WD300-25L-C Features

Designed for long-term outdoor installation in residential and commercial projects.

Smooth, Even Water Sheet

A precision-polished outlet and an internal baffle distribute water evenly across the spillway for a smooth sheet and quiet flow.

ABS Housing and Thick Acrylic Outlet

The durable ABS housing resists corrosion, rust, and compression. The thick acrylic outlet helps reduce cracking, warping, and leaks.

Epistar SMD2835 LEDs · 100 lm/W

The built-in 4 W RGB LED strip changes colors and lighting modes via the included remote.

IP68 Waterproof Protection with Multilayer Sealing

Multilayer seals, a waterproof cable connector, and a protected LED compartment suit pools, garden waterfalls, fountains, and wet environments.

12 V DC Lighting

The light runs on 12 V DC through the included power adapter.

Slim, Concealed Outlet

The slim, straight outlet sits discreetly against the wall for a clean waterfall line.

Materials and Construction

Main components include a water deflector, waterproof connector, thick acrylic outlet, high-brightness LEDs, and an ABS housing.

WD spillway components: water inlet, waterproof connector, thick acrylic outlet, LED chips, and ABS housing
Spillway Construction

ABS housing, thick acrylic outlet, and built-in LEDs

WD waterfall spillway with IP68 waterproof protection
IP68 Waterproof

Multilayer sealing and waterproof cable connector

WD300-25L-C waterfall spillway with RGB remote
WD300-25L-C Dimensions

Nominal size: 300 mm · Length A: 306 mm

Blue LED waterfall on a marble wall
RGB Lighting on the Water Sheet

Change colors with the included RF remote.

Dimensions and Specifications

Model Comparison and Dimensions

ModelVersionPowerLength AVoltage
WD300-25LWiring (no controller)4 W306 mmDC 12 V
WD300-25L-CThis ModelAll-in-One (controller + remote)4 W306 mmDC 12 V
WD600-25LWiring (no controller)8 W606 mmDC 12 V
WD600-25L-CKitAll-in-One (controller + remote)8 W606 mmDC 12 V
WD900-25LWiring (no controller)12 W906 mmDC 12 V
WD900-25L-CKitAll-in-One (controller + remote)12 W906 mmDC 12 V
WD1200-25LWiring (no controller)17 W1,206 mmDC 12 V
WD1200-25L-CKitAll-in-One (controller + remote)17 W1,206 mmDC 12 V

WD300-25L-C Specifications

VoltageDC 12V
IP RatingIP68
LED TypeEpistar SMD2835
Luminous Efficacy100 lm/W
Light ColorColor-Changing RGB
Housing MaterialABS
Water OutletThick Acrylic
Water Inlet50 mm (1.5 in.)
Housing Depth (B)138 mm
Housing Height (C)76 mm
Outlet Height (D)25 mm

Dimension Drawing (A / B / C / D)

WD dimension drawing: length A, depth B 138 mm, height C 76 mm, and outlet height D 25 mm

Kit Contents and Lighting Controls

The all-in-one kit includes the RGB LED waterfall spillway, a power adapter, an RGB controller, and an RF remote.

RF Remote

RF Remote

Change colors and switch lighting modes using the included RGB controller and remote.

Controller K60

Power Adapter and RGB Controller

The adapter supplies 12 V DC to the 4 W lighting unit.

APP (RGB)

App Control

App control requires a compatible RGB controller.

Installation

The unit is designed to be recessed into a brick or block wall during construction. Connect the pump to the 1.5-inch inlet through a valve.

Waterfall installation diagram showing the wall, valve, pool return pipe, and 10 mm outlet projection
1
Set the Spillway Level in the Wall

Install the spillway level across its full length. The manufacturer's drawing shows the outlet extending about 10 mm beyond the finished wall to help produce an even water sheet.

2
Connect the 1.5-inch Inlet and Valve

Connect the pump through a flow-control valve. If water pressure is too high, divert excess flow back to the pool or holding tank.

3
Connect the 12 V DC Wiring

Connect the light to a 12 V DC power supply and controller rated for the total load. Install the control box outside the pool.

4
Test Water Flow and Lighting

Run the pump and adjust the valve until the water forms a smooth sheet. Then test the lighting and controls.

Caution: Do not connect the light directly to 220 V mains power. Have a qualified electrician install the system with residual-current protection (RCD or RCBO) in accordance with applicable safety standards.
System diagram showing the controller, spillway, water inlet, LED strip, baffle, and outlet
System and Internal Layout

Control box, spillway, water inlet, baffle, LED strip, and outlet

Waterfall projection chart at flow rates of 23, 34, and 45 liters per minute
Waterfall Projection Chart

This chart shows how far the water projects at different installation heights and flow rates for the nominal 300 mm model.

Installation Examples

Pools, gardens, ponds, outdoor spaces, spas, and hotels

Decorative waterfall walls for outdoor areas, spas, and pools Decorative water features, spas, and pools
Multicolor LED waterfalls at a pool and stone wall Pool walls and gardens
Large RGB waterfall in a hotel landscape Large landscape projects

Suitable Applications

Homes and villas with illuminated pool or garden waterfalls

Hotels, resorts, and spas with nighttime landscape features

Pool and landscape contractors

Architects and designers specifying decorative waterfall walls

Care and Maintenance

Keep water chemistry balanced to reduce scale at the outlet, which can break up the water sheet.

Wipe the acrylic outlet with a soft cloth. Avoid stiff brushes and corrosive cleaners.

Clean the pump basket and filter regularly to keep leaves and debris from clogging the spillway.

Check the cable connector and power supply enclosure periodically. Keep them dry and securely closed.

Frequently Asked Questions

How long is the WD300-25L-C?

The nominal size is 300 mm. The actual housing length (A) is 306 mm. Use dimension A when planning the wall installation.

What size pump do I need?

Pump sizing depends on spillway length, the number of units, the lift height, and the pipe run. Contact our team for help sizing the pump. A flow-control valve lets you adjust the thickness of the water sheet.

Can I connect it directly to 220 V mains power?

The light requires a 12 V DC power supply. Have a qualified electrician install the power supply and residual-current protection.

How do I control the RGB lighting?

Use the included RF remote and RGB controller to change colors or lighting modes. Ask about compatible controllers if you want app control.

Can I add it to an existing pool?

Yes. The unit can be installed in new pools and renovations, provided a 1.5-inch water line and electrical wiring can reach the installation point. Our team can help assess the site.

Why is the water sheet uneven?

Common causes include an unlevel spillway, flow that is too high or too low, or scale or debris at the outlet. Check the level, adjust the flow valve, and clean the outlet.

Need a Waterfall Light for Your Project?

Send your wall dimensions or pool drawings to Win Win Pool Shop. Our team can help assess the installation location and select suitable equipment.

Ratings & Reviews
There are no ratings and reviews yet. Be the first to comment.
icon-messenger
This website uses cookies to enhance performance and provide you with a better user experience. You can read more details at: Privacy Policy and Cookies Policy