LED Pool Lights › Main Products – In Stock
NEW SERIES F3 · Featured ProductsLow-voltage 12V · IP68 waterproof · Warm White / Cool White / RGBW
Just 7.5 mm thin, lightweight, easy to install and great value – ideal for new pools and light replacements alike.
UT-AP is the best-value ultra-thin pool light in its class. The ABS body is fully filled with resin and only 7.5 mm thick, so it stays lightweight. It mounts to the pool wall with screws – no deep recessed niche required. Options range from 6W for spas and steps up to 18W for residential pools, and RGBW models can be controlled via a 5-wire external controller or WiFi.
Key Specs
Light Colors
Ultra-slim, easy to install and great value, with modern color control.
Modern look that sits flush against the pool wall
100% waterproof – LED board and all wire connections fully sealed
RGBW models work with an external control box or via WiFi
Colors change to the beat of your music, with voice-command support
Around 10× longer than halogen bulbs
Slim wall-mounted LED pool light running on safe DC 12V low voltage
| Item | Details |
|---|---|
| LED type | High-brightness SMD2835 |
| Luminous efficacy | Up to 100 lm/W |
| Waterproofing | IP68 – LED board and all wire connections fully resin-sealed |
| Body / Lens | Resin-filled ABS body, clear PC lens |
| Cable | 2-core, 1.5 m (custom lengths available) |
| Power supply | DC 12V only – use a waterproof DC 12V driver |
| Installation | Screw-mounted to the wall, no deep recessed niche required |
| Lifespan | Over 50,000 hours |
| Applications | Swimming pools, hotels, fountains, bathtubs, jacuzzis, decorative water features |
| Certifications | IP68 · RoHS · CE · FCC · CB · ISO |
| Warranty | 2 years |
Warm White≈3000K
Cool White≈6000K
RGBWColor-changing + pure white
How to choose a color? Blue tiles → Cool White (CW) for crystal-clear water · Sand/grey tones → Warm White (WW) for a warm, luxurious feel · Pool villas/resorts → RGBW to create multiple moods
This series runs on DC 12V only and requires a waterproof DC 12V driver, model DY – never use an AC transformer and never connect directly to 220V.
| Transformer model | Usable load (80%) | 6W lights | 12W lights | 18W lights |
|---|---|---|---|---|
| DY100 | 80 W | 13 pcs | 6 pcs | 4 pcs |
| DY150 | 120 W | 20 pcs | 10 pcs | 6 pcs |
| DY200 | 160 W | 26 pcs | 13 pcs | 8 pcs |
Sizing rule: the total wattage of all lights must not exceed 80% of the transformer's rating · Keep 12V cable runs as short as possible; for longer distances use a thicker cable to reduce voltage drop (dimming).
Safety: The transformer's 220V input should be protected by a residual-current breaker (RCBO/ELCB) with proper grounding, and every cable joint around the pool should use IP68 waterproof connectors (JX). Electrical work should be carried out by a qualified technician.
General guide for residential pools with a standard depth of 1.2–1.5 m (for deeper pools, dark tiles or extra brightness, increase the wattage or number of lights).
| Pool type | Water surface area | Number of lights | Wattage per light |
|---|---|---|---|
| Spa / jacuzzi / steps | — | 1–2 | 6–12W |
| Small pool 3 × 6 m | ≈ 18 m² | 1–2 | 18–25W |
| Home pool 4 × 8 m | ≈ 32 m² | 2–3 | 18–35W |
| Home pool 5 × 10 m | ≈ 50 m² | 3–4 | 25–35W |
| Large / hotel pool 6 × 12 m and up | ≥ 72 m² | 4–6 or more | 35–45W |
This series is available in 6W 12W 18W (max 18W) · Typical spacing between lights is 3–4 m, installed about 45–60 cm below the water line. Aim the light away from the main viewing area (e.g. away from the house) to reduce glare.
5 simple steps to keep your lights bright and long-lasting
Common customer questions about DC 12V LED pool lights
UT-AP has a 7.5 mm ABS body and offers better value, while UT-SP has a 5 mm 316 stainless steel rim for a more premium look and is especially suited to saltwater pools. Both run on DC 12V.
Add up the wattage of all lights and choose a driver where the total does not exceed 80% of its rating. For example, 4 × UT230-AP 18W (72W) can run on a DY100.
Yes. Fix it with screws and seal tightly around the cable hole. We recommend having a technician check the wall thickness before drilling.
An 18–35W LED light delivers brightness close to a 100–300W PAR56 halogen bulb, saving around 80–90% on electricity, with a lifespan of over 50,000 hours.
Mounting the light is straightforward, but wiring, the transformer and the residual-current breaker should be handled by an experienced electrician or pool technician for the safety of pool users. The WinWin Pool team offers installation in Bangkok, Hua Hin and Pattaya.
The main products on this page carry a 2-year warranty under company terms (excluding damage caused by connecting the wrong power type or voltage).
Send us your pool size, depth and site photos – the WinWin Pool team will help you choose the right model, number of lights and transformer, free of charge.