QUT160-SP 12 W Cool White 6000 K LED Pool Light, 5 mm Profile, 316 Stainless Steel Trim
SKU : QUT160-SP-12W-CW
0 Sold
Quantity
Promotions and Special Offers
Buy products worth every ฿3,000 Get an instant discount 4%
Buy products worth every ฿5,000 Get an instant discount 5%
Buy products worth every ฿20,000 Get an instant discount 6%
Buy products worth every ฿40,000 Get an instant discount 7%
Buy products worth every ฿3,000 Get an instant discount 3% (For Everyone)
Buy products worth every ฿5,000 Get an instant discount 4% (For Everyone)
Buy products worth every ฿20,000 Get an instant discount 5% (For Everyone)
Buy products worth every ฿40,000 Get an instant discount 6% (For Everyone)
Short Description
The UT160-SP is a 12 W wall-mounted underwater LED pool light with cool white light at 6000 K. It measures 160 mm in diameter and 5 mm thick, with 316 stainless steel trim, a resin-filled housing, and a silicone seal. Rated IP68, it runs on 12 V DC and comes with a 1.5 m two-core cable.
Just 5 mm thick, with a close fit against the pool wall and 316 stainless steel trim suitable for saltwater pools.
The UT-SP is an ultra-thin LED pool light that sits nearly flush against the pool wall. Its polished 316 stainless steel trim resists corrosion in saltwater pools, and its fully resin-filled housing is rated IP68. Choose Warm White, Cool White, or RGBW. RGBW control options include a remote, a mobile app, music sync, and voice control. The low-profile design suits pool villas, infinity pools, and hotels.
- 6W / 12W / 18W
- DC 12V
- IP68 Waterproof Rating
- LED SMD2835
- Warm White
- Cool White
- RGBW
UT-SP Series Highlights
Ultra-Thin 5 mm Profile
Sits nearly flush against the pool wall, with minimal protrusion into the swimming area.
316 Stainless Steel
Suitable for salt-chlorinated pools and seawater applications.
Fully Resin-Filled, IP68-Rated
Sealed against water ingress and designed to resist yellowing and corrosion.
Smart RGBW Control
Remote control, mobile app control, music sync, and voice control.
Service Life: Over 50,000 Hours
Uses substantially less power than comparable halogen lighting.
Models and Specifications
| Model | Power | Light Color | Dimensions (mm) | Voltage | LED Type | Material |
|---|---|---|---|---|---|---|
| QHL-UT110-SP | 6 W | Warm White | Ø110 × H5 | DC 12 V | SMD2835 | Stainless Steel + Silicone |
| QHL-UT110-SP | Cool White | DC 12 V | SMD2835 | Stainless Steel + Silicone | ||
| QHL-UT110-SP | RGBW | DC 12 V | SMD2835 | Stainless Steel + Silicone | ||
| QHL-UT160-SP | 12 W | Warm White | Ø160 × H5 | DC 12 V | SMD2835 | Stainless Steel + Silicone |
| QHL-UT160-SP | Cool White | DC 12 V | SMD2835 | Stainless Steel + Silicone | ||
| QHL-UT160-SP | RGBW | DC 12 V | SMD2835 | Stainless Steel + Silicone | ||
| QHL-UT230-SP | 18 W | Warm White | Ø230 × H5 | DC 12 V | SMD2835 | Stainless Steel + Silicone |
| QHL-UT230-SP | Cool White | DC 12 V | SMD2835 | Stainless Steel + Silicone | ||
| QHL-UT230-SP | RGBW | DC 12 V | SMD2835 | Stainless Steel + Silicone | ||
| QHL-UT280-SP | 18 W | Warm White | Ø280 × H5 | DC 12 V | SMD2835 | Stainless Steel + Silicone |
| QHL-UT280-SP | Cool White | DC 12 V | SMD2835 | Stainless Steel + Silicone |
General Specifications
| Item | Details |
|---|---|
| LED Type | High-brightness SMD2835 LEDs |
| Luminous Efficacy | Up to 100 lm/W |
| Water Ingress Protection | IP68, fully resin-filled |
| Housing / Lens | 316 stainless steel trim, polycarbonate lens, and silicone seal |
| Power Cable | 1.5 m two-core cable (custom lengths available) |
| Power Supply | 12 V DC only. Use a waterproof 12 V DC driver. |
| Installation | Screw-mounted to the pool wall. Suitable for concrete, tiled, and fiberglass pools, as well as retrofit installations. |
| Service Life | More than 50,000 hours |
| Applications | Pool villas, hotel pools, infinity pools, spas, hot tubs, and fountains |
| Standards | IP68 · RoHS · CE · FCC · CB · ISO |
| Warranty | 1 years |
Product Dimensions
The diameter is measured across the outer edge of the fixture. Every model is 5 mm thick.
Installation
The UT-SP mounts to the pool wall with screws. Before installation, have the installer check the wall surface, mounting points, and cable exit position against the instructions for the specific model.
Use 12 V DC only. Have a qualified electrician install the light in accordance with the product manual and applicable pool electrical requirements. Never connect the fixture directly to mains power.
Recommended Applications
- Pool villas and design-led luxury homes
- Salt-chlorinated pools and coastal pools
- Infinity pools, spas, and hot tubs
- Hotels looking for app-controlled RGBW lighting
Light Color Options
Warm WhiteWarm white, approx. 3000 K
Cool WhiteCool white, approx. 6000 K
RGBWColor-changing light + dedicated white
Pool Size and Lighting Guide
General guidelines for residential pools 1.21.5 m deep. Deeper pools, darker tiles, or higher brightness requirements may call for higher-wattage fixtures or more lights.
| Pool Type | Water Surface Area | Number of Lights | Power per Light |
|---|---|---|---|
| Spas / Hot Tubs / Steps | 12 lights | 612W | |
| Small Pool, 3 × 6 m | Approx. 18 m² | 12 lights | 1825W |
| Residential Pool, 4 × 8 m | Approx. 32 m² | 23 lights | 1835W |
| Residential Pool, 5 × 10 m | Approx. 50 m² | 34 lights | 2535W |
| Large / Hotel Pool, 6 × 12 m and up | 72 m² and up | 46 lights or more | 3545W |
The UT-SP models listed on this page are available in 6 W, 12 W, and 18 W. Typical spacing is 34 m, with the lights installed approximately 4560 cm below the waterline. Aim the lights away from the main viewing area, such as the house, to reduce glare.
Care and Maintenance
- Switch off the light and its circuit breaker before cleaning or removing the fixture.
- Wipe the lens monthly with a soft cloth or sponge to remove scale and algae that can reduce light output.
- Maintain balanced pool water (pH 7.27.6) to help reduce scale on the lens and extend seal life.
- Inspect cable junction boxes and connections once or twice a year for moisture, standing water, or corrosion.
- Limit out-of-water testing to 12 minutes. The fixture is designed to dissipate heat through the surrounding water.
- Avoid wire brushes and strong acids on the stainless steel trim. Use a mild stainless steel cleaner for stains.
Frequently Asked Questions (FAQ)
Need help choosing the right light for your pool?
Send us your pool dimensions, depth, and site photos. The WinWin Pool team can help you choose the right model, number of lights, and power supply at no charge.
Specifications may change without notice as products are improved. Images are for illustration. Actual colors may vary slightly. · WIN WIN ENGINEERING SUPPLY CO., LTD. · Swimming pool products, services, and technical advice.
Related Products
QHL-UT110-AP 6 W Ultra-Thin LED Pool Light | Ø110 mm, 7.5 mm Thick
QHL-UT110-AP 6 W Cool White LED Pool Light t | Ø110 mm, 7.5 mm Thick
QHL-UT110-AP 6 W RGBW Color-Changing LED Pool Light | Ø110 mm, 7.5 mm Thick
QHL-UT160-AP 12 W Cool White LED Pool Light t | Ø160 mm, 7.5 mm Thick
