WavePath 2.0 Navigation System
Advanced WavePath 2.0 technology intelligently determines the robot's position in the pool and selects an efficient cleaning path for thorough coverage of pool surfaces.
Pre Order
Aiper Scuba S1 Cordless Robotic Pool Cleaner
SKU : Aiper Scuba S1
0 Sold
฿27,999
Quantity
Promotions and Special Offers
Buy products worth every ฿3,000 Get an instant discount 4%
Buy products worth every ฿5,000 Get an instant discount 5%
Buy products worth every ฿20,000 Get an instant discount 6%
Buy products worth every ฿40,000 Get an instant discount 7%
Buy products worth every ฿3,000 Get an instant discount 3% (For Everyone)
Buy products worth every ฿5,000 Get an instant discount 4% (For Everyone)
Buy products worth every ฿20,000 Get an instant discount 5% (For Everyone)
Buy products worth every ฿40,000 Get an instant discount 6% (For Everyone)
Short Description
The Aiper Scuba S1 is a cordless robotic pool cleaner featuring WavePath 2.0 smart navigation for efficient floor, wall, and waterline cleaning. Designed for pools up to 150 m² (1,600 sq. ft.), it offers up to 180 minutes of runtime and four cleaning modes: Auto, Floor, Wall, and Eco. Equipped with a 180-micron filter basket and compatible with an optional 3-micron MicroMesh filter for finer debris removal.
Brands: AIPER
Wishlist
Compare
Product Highlights
Download
VDO
Aiper Scuba S1
On Track to Perform Powerful Cleaning on Every Path, Spotless on Every Surface
Cleaning Coverage
Pool Floor
Pool Walls and Waterline
150 sq.m.
Maximum Cleaning Area
(1,600 sq.ft.)
15,900
Suction Flow Rate (L/h)
(4,200 GPH)
180 min
Operating Time
Per Charge
34 hrs
Charging Time
To Full Charge
180 / 3 μm
Filtration Rating
Filter Basket / Fine Filter
Features
Smarter Technology for a Cleaner Pool
Designed to clean every pool surface thoroughly, so you can spend less time cleaning and more time swimming.
Cleaning Modes
4 Cleaning Modes for Every Need
AutoAuto
When the battery is above 50%, the robot cleans walls first. Below 50%, it cleans the pool floor.
FloorFloor
Cleans the pool floor only.
WallWall
Cleans pool walls only.
EcoEco
Cleans the pool floor for 45 minutes every 48 hours, for up to one week or until the battery runs low.
Adaptive Path
Enable inApp > Settings > Clean Path Preferences > Adaptive Path
- Adaptive PathIdeal for pools with complex floor shapes, such as bowl-shaped or diamond-bottom pools.
- S-Shaped PathIdeal for flat-bottom pools.
- With Adaptive Path enabled, Auto mode cleans the floor in a randomized pattern and climbs walls upon reaching the pool edge, regardless of battery level. Operating time gradually decreases. Wall mode uses an N-shaped cleaning path.
Specifications
Technical Specifications
| Model | Aiper Scuba S1 |
|---|---|
| Cleaning Coverage | Pool floor, walls, and waterline |
| Supported Pool Size | Up to 150 sq.m. (1,600 sq.ft.)Maximum pool length: 15 m |
| Maximum Water Depth | 3 m |
| Suction / Flow Rate | 15,900 L/h (4,200 GPH) |
| Operating Time | Up to 180 minutes |
| Charging Time | 34 hours |
| Battery | Lithium battery, 14.4 V, 7,800 mAh (112.32 Wh) |
| Filtration Rating | 180 μm filter basketOptional: 3 μm ultra-fine MicroMesh filter |
| Filter Basket Capacity | 3.5 L (top-loading) |
| Climbing Angle | 45°Actual wall-climbing performance depends on pool construction and surface material. |
| Cleaning Modes | Auto · Floor · Wall · Eco |
| Navigation System | WavePath 2.0 |
| Motor | High-efficiency, energy-saving brushless motor |
| Safety Protection | Water detection (automatically stops when removed from water), under/overvoltage protection, over-discharge and overcharge protection. |
| Robot Indicator Lights | Solid blue: Fully charged Slow flashing blue: Battery >50% Slow flashing yellow: Battery 1550% Slow flashing red: Battery <15% |
| Power Adapter Indicator | Solid green |
What's in the box
What's in the Box?
Aiper Scuba S1× 1
DC Charging Adapter× 1
Retrieval Hook× 1
User Manual× 1
Pool compatibility
Which Pools Are Suitable for Scuba S1?
Check your pool's configuration before use to ensure optimal robot performance.
Suitable PoolsCompatible
- In-ground rectangular and freeform pools up to 150 sq.m.
- Main drain covers no higher than 3 cm and vertical pool walls.
- Suitable for pools with all types of surface materials.
Pools Requiring CautionUse Caution
- Curved pool steps may trap the robot and prevent it from reversing.
- Wide rounded transitions between the floor and walls may prevent wall climbing.
- Underwater light covers may cause the robot to repeat wall-climbing cycles.
- Extremely dirty pools can clog the filter basket immediately, preventing normal operation. Pre-clean the pool first.
Recommended Water Conditions
1035°C
Water Temperature
7.07.4
pH Level
4 ppm
Chlorine
5,000 ppm
Salt (NaCl)
FAQ
Frequently Asked Questions
Blue LightBattery above 50%
Yellow LightBattery 1549%
Red LightBattery below 15%
Solid Blue (While Charging)Fully charged
Which areas of the pool can Scuba S1 clean?
It cleans pool floors, walls, and the waterline in pools up to 150 sq.m., with a maximum water depth of 3 m.
How does Eco mode work?
The robot cleans the pool floor for 45 minutes every 48 hours, for up to one week or until the battery runs low. It conserves energy between cycles, making it convenient for pools mainly used on weekends.
In Auto mode, does the robot clean the walls or the floor first?
Above 50% battery, it cleans the walls first; below 50%, it switches to the floor. When Adaptive Path is enabled, it climbs walls upon reaching the pool edge, regardless of battery level.
Can I remove the robot from the water during operation?
Yes. The robot detects when it is out of the water, its indicator stays on for approximately 30 seconds and then turns off, and the robot stops automatically. Use the retrieval hook supplied in the box to lift it out.
Should I use the 180 μm filter basket or the 3 μm filter?
- 180 μm Filter BasketSuitable for general cleaning, leaves, and medium-to-large debris.
- 3 μm MicroMesh FilterCaptures fine dust and sand for clearer water. Clean it more frequently to prevent clogging.
How do I switch the robot on/off and check charging status?
Briefly press Power to turn the robot on; the indicator color shows the battery level. Briefly press again to turn it off. During charging, the indicator flashes slowly according to battery level, then stays solid blue once fully charged. If the battery runs out during operation, the light turns solid red before switching off.
