-40%
K065PRPH0000-PH
Kontrol 65 SERIES

SEKO PH Kontrol 65 panel mounting

SKU : K065PRPH0000

1 Sold

5.0 / 5 (1 Reviews)

฿23,540
฿14,124

Quantity

Promotions and Special Offers

Buy products worth every ฿3,000 Get an instant discount 4%

Buy products worth every ฿5,000 Get an instant discount 5%

Buy products worth every ฿20,000 Get an instant discount 6%

Buy products worth every ฿40,000 Get an instant discount 7%

Buy products worth every ฿3,000 Get an instant discount 3% (For Everyone)

Buy products worth every ฿5,000 Get an instant discount 4% (For Everyone)

Buy products worth every ฿20,000 Get an instant discount 5% (For Everyone)

Buy products worth every ฿40,000 Get an instant discount 6% (For Everyone)

Short Description

Kontrol 65 panel mounting
Single parameter controller, pH/ORP
- pH: 0 - 14 pH
- Power Supply: 24/115/230 VAC, 50-60 Hz
- Dimension: 96x96x42 mm.
- Protection Degree: IP65 Front, IP20 Bac(update 05/03/2026)

Brands: SEKO
Categories: Dosing Pump, SEKO, Kontrol K65
Wishlist
Compare
Product description
DOWNLOAD
VDO
SEKO ItalypH / ORPPanel Mounting

SEKO Kontrol 65 pH/ORP Panel-Mount Controller for Swimming Pools

A single-parameter controller that measures and controls pool water quality, configurable for either pH or ORP (Redox). Its backlit display is easy to read, the bar-style menu is quick to navigate, and its proportional outputs drive chemical dosing pumps automatically. Designed to fit into the control panel in your plant room.

SKU: K065PRPH0000
0 - 14
pH range
±2,000 mV
ORP range
96×96 mm
Front size
SEKO Kontrol 65 pH/ORP panel mounting controller for swimming pools

Key Features of SEKO Kontrol 65

pH
pH or ORP in One Unit
Set it up to measure pH (0 - 14) or ORP (±2,000 mV), depending on which value you need to control.
%
Proportional Control
Drives dosing pumps through a TWM relay, a 4-20 mA output, or a frequency output for digital pumps, so the controller doses as much chemical as the water needs, without overdosing or underdosing.
CAL
Wizard Calibration
Calibrate the probe step by step with on-screen guidance. The display also shows the probe's health, so you know when to replace it.
LCD
128×128 Backlit Display
Clear readings with a bar graph, easy to read even in a dim plant room.
IP65
IP65 Front Panel
The front is protected against dust and water splashes, ideal for control panel doors.
V
Multi-Voltage Supply
Runs on 24 / 115 / 230 VAC, 50-60 Hz, so it suits a wide range of installations.

Specifications

Brand / Model
SEKO Kontrol 65 Panel Mounting
SKU
K065PRPH0000
Type
Single-parameter controller (pH or ORP)
pH range
0 - 14 pH
ORP range
±2,000 mV
Power supply
24 / 115 / 230 VAC, 50-60 Hz
Dimensions (W×H×D)
96 × 96 × 42 mm
Protection rating
IP65 front / IP20 back
Display
Alphanumeric 128 × 128 pixel with backlight
Control outputs
Proportional relay in TWM (Time Width Modulation) mode, 4-20 mA, frequency output for digital pumps
Menu
Multi-language
Panel cut-out size
[Spec to be verified]
Probe included
pH/ORP probe not included
Suitable pool size
Medium to large pools and commercial pools (Professional)

Dimensions & Product Details

Unit size: 96 × 96 × 42 mm (W × H × D). See the drawings and product details below.

SEKO Kontrol 65 pH/ORP panel mounting controller for swimming pools 1
SEKO Kontrol 65 pH/ORP panel mounting controller for swimming pools 2
SEKO Kontrol 65 pH/ORP panel mounting controller for swimming pools 3
SEKO Kontrol 65 pH/ORP panel mounting controller for swimming pools 4
SEKO Kontrol 65 pH/ORP panel mounting controller for swimming pools 5

Who Is It For?

Ideal Users
Hotels, resorts, condominiums and clubs with public pools
Contractors and pool technicians who build plant-room control panels
Homes and villas that want automatic acid or chlorine dosing
Pools that need separate controllers for pH and ORP
Problems It Solves
Unstable pH that irritates skin and eyes or causes scaling
Too little chlorine causing green water, or chemicals wasted through overdosing
Staff time spent testing water and dosing chemicals by hand
The need for a reliable automatic system you can monitor

Installation & Operation

1Cut the panel opening to the size specified in the manual and secure the unit firmly.
2Install the pH or ORP probe where water flows steadily (in a probe holder or flow cell), after the filter and before the chemical injection point.
3Connect the power supply at your chosen voltage (24/115/230 VAC) and wire the output to the dosing pump (relay, 4-20 mA or frequency signal).
4Calibrate the probe with standard buffer solutions using the Wizard menu.
5Set your target values, e.g. pH 7.2-7.6 or ORP around 650-750 mV, then test the dosing.
Caution: Electrical work and pump connections should be done by a qualified technician. Install an interlock so the dosing pump runs only when the circulation pump is running, to stop chemicals building up in the pipes.

Maintenance Tips

Calibrate the pH probe every 1-2 months, or whenever readings differ from your manual test kit.
Clean the probe gently when scale or algae builds up. Never scrub it with abrasive pads or hard objects.
Never let the probe dry out. During long shutdowns, remove it and store it in its cap with storage solution.
Check the probe health indicator in the menu. If it keeps dropping, plan a replacement (typically every 1-2 years, depending on use).
Inspect dosing pump tubing and fittings regularly for leaks.

Related Products

P
SEKO Dosing Pumps
Dosing pumps for pH-reducing acid or liquid chlorine, controlled by the Kontrol 65.
E
pH / ORP Probes
Spare probes and pH 4 / pH 7 / ORP calibration solutions for routine maintenance.

Frequently Asked Questions (FAQ)

Can this unit measure pH and ORP at the same time?
No. Kontrol 65 is a single-parameter controller, set to either pH or ORP. To control both, use two units: one for acid dosing and one for chlorine dosing.
What is the difference between panel mounting and the wall-mount version?
The 96×96 mm panel version is built into a control panel door (IP65 front / IP20 back). The wall-mount version comes in a fully enclosed IP65 ABS box (144×144×123 mm) that mounts directly on a wall without a separate panel.
Can it be used with a salt chlorinator?
Yes. In pH mode it controls an acid dosing pump, which is essential for salt pools because their pH tends to rise steadily. Whether ORP mode can control a salt chlorinator depends on whether that chlorinator accepts an external control signal. Please ask our team.
Does the package include a probe?
No, the pH/ORP probe is not included and must be ordered separately for the parameter you use. Our team can help you choose the right probe, probe holder and calibration solutions for your site.
What pH and ORP values should I set?
The usual recommended values for swimming pools are pH 7.2-7.6 and ORP around 650-750 mV. Check against a manual chlorine test kit from time to time.
Does Win Win offer installation?
Yes. Our technicians can advise on and install automatic chemical control systems for homes, villas and commercial projects. Contact us by phone or LINE.
Let the System Look After Your Water, 24 Hours a Day
Get free expert advice from Win Win Pool Shop on choosing the right controller, dosing pump and probe for your pool size.
Call 02 989 1111LINE @winwinpool
Win Win Pool Shop - Swimming Pool Equipment Supplier | Tel. 02 989 1111 | LINE @winwinpool
SEKO Kontrol 65 pH Controller ORP Controller Pool Chemical Controller Dosing Control
Ratings & Reviews
There are no ratings and reviews yet. Be the first to comment.

Related Products

Mixing Cell - Complete
-39%

Mixing Cell - Complete

฿0
฿2,797
฿1,700
Probe PH Halo Bluetooth (for Halo Chlor only)
-42%

Probe PH Halo Bluetooth (for Halo Chlor only)

฿0
฿10,624
฿6,200
Probe ORP Halo Bluetooth
-41%

Probe ORP Halo Bluetooth

฿0
฿12,301
฿7,200
Halo Acid Doser Kit Complete
-41%

Halo Acid Doser Kit Complete

฿0
฿19,762
฿11,700
icon-messenger
This website uses cookies to enhance performance and provide you with a better user experience. You can read more details at: Privacy Policy and Cookies Policy