EMAUX ICF150 Galaxy Cartridge Pool Filter 150 ft², 27.2 m³/h
SKU : FI-EM-CAR-ICF150
1 Sold
Quantity
Promotions and Special Offers
Buy products worth every ฿3,000 Get an instant discount 4%
Buy products worth every ฿5,000 Get an instant discount 5%
Buy products worth every ฿20,000 Get an instant discount 6%
Buy products worth every ฿40,000 Get an instant discount 7%
Buy products worth every ฿3,000 Get an instant discount 3% (For Everyone)
Buy products worth every ฿5,000 Get an instant discount 4% (For Everyone)
Buy products worth every ฿20,000 Get an instant discount 5% (For Everyone)
Buy products worth every ฿40,000 Get an instant discount 6% (For Everyone)
Short Description
EMAUX Galaxy ICF150 single-element cartridge pool filter: 150 ft² filter area, 27.2 m³/h flow, 2" ports. No backwashing. Free sizing advice on LINE. (Update 14/02/2026)
Why Choose the Galaxy Cartridge Filter
User-friendly, high filtration quality, cost-effective over the long term, easy to install, and built to last outdoors.
No Backwashing — Saves Water & Chemicals
Unlike sand filters, a cartridge system needs no backwashing, so you don’t waste pool water and dissolved chlorine with every clean.
Fine Filtration, Sparkling Water
Works with pleated Emaux cartridge elements (137–187 pleats), maximising the surface area that captures fine debris.
Pressure Gauge Tells You When to Clean
A colour-zoned START / CLEAN FILTER gauge shows at a glance when the cartridge needs cleaning — no guesswork.
Easy Cartridge Replacement
A knee-height tank base and quick release lock ring make it easy to open the lid and lift the cartridge out.
UV-Resistant, Weatherproof Tank
The weatherproof cylindrical rounded top is suited to outdoor installation in a plant room or poolside.
Easy Installation, Standard Unions
Supplied with union connections for GB50 (1.5"/2") or GB63 (2"/2.5") pipe — remove the tank for service without cutting pipework.
Product Features
Opens and closes the lid securely
Withstands sun, wind and rain
Available as a standard or anti-microbial element
Choose the size that matches your existing pipework
UV-resistant plastic tank · Max operating pressure 3.4 bar (50 psi) · Max water temperature 40°C (104°F)
Galaxy Single-Element Technical Data
| Model (Standard Element) | Model (Anti-Microbial Element) | Filter Area ft² / m² | Flow Velocity gpm/ft² · m³/h/m² | Max Flow Rate gpm / lpm / m³/h | In / Outlet Connections |
|---|---|---|---|---|---|
| ICF100 9140401 | ICF100S 9140409 | 100 / 9.29 | 1.0 · 2.443 | 100 / 379 / 22.7 | GB50 (1.5"/2") GB63 (2"/2.5") |
| ICF150 9140402 | ICF150S 9140410 | 150 / 13.94 | 0.8 · 1.955 | 120 / 454 / 27.2 | GB50 (1.5"/2") GB63 (2"/2.5") |
| ICF200 9140403 | ICF200S 9140411 | 200 / 18.58 | 0.6 · 1.466 | 120 / 454 / 27.2 | GB50 (1.5"/2") GB63 (2"/2.5") |
All models: UV-resistant plastic tank · Max operating pressure 3.4 bar (50 psi) · Max water temperature 40°C (104°F)
Tank Dimensions (mm)
| Model | A Overall Height | B To Upper Port | C Overall Width | D Ø Tank | E Ø Base | F To Lower Port |
|---|---|---|---|---|---|---|
| ICF100 / ICF100S | 825 | 444.5 | 588 | 304 | 335 | 91 |
| ICF150 / ICF150S | 910 | 444.5 | 588 | 304 | 335 | 91 |
| ICF200 / ICF200S | 1033 | 444.5 | 588 | 304 | 335 | 91 |
Dimension labels B and F are based on the manufacturer’s drawing. Please measure on site before installing pipework.
Cartridge Filter Elements (Replacement Parts)
| For Filter | Standard Element | Anti-Microbial Element | G Length (mm) | H Diameter | Micron Rating | Pleats |
|---|---|---|---|---|---|---|
| ICF100 | ICF100-CE 914100004 | ICF100S-CE 914100018 | 497 | Ø267 | 15 µm | 137 |
| ICF150 | ICF150-CE 914100005 | ICF150S-CE 914100019 | 590 | Ø267 | 15 µm | 172 |
| ICF200 | ICF200-CE 914100006 | ICF200S-CE 914100020 | 717 | Ø267 | 15 µm | 187 |
The manufacturer’s element table lists 15 microns, while the features page states “maximum filtration accuracy of 5 microns”. [ตรวจสอบสเปก]
What’s in the Box
Every Galaxy Series filter comes with 1) Universal standard union connections · 2) Pressure gauge · 3) Cartridge filter element
Which Model Is Right for You?
ICF100
100 ft² · Max 22.7 m³/hSmall residential pools, villa pools, spas and jacuzzis, or systems with lower-flow pumps where a compact tank is preferred.
ICF150
150 ft² · Max 27.2 m³/hMedium residential pools and rental pool villas that need longer intervals between cartridge cleans than the ICF100.
ICF200
200 ft² · Max 27.2 m³/hFrequently used pools, semi-commercial pools and small resorts. The largest filter area and lowest flow velocity (0.6) for finer filtration and fewer cleans.
Quick Sizing Guide
Required flow rate (m³/h) = Pool volume (m³) ÷ Turnover time (hours) (residential pools typically 6–8 hours)
Example: a 60 m³ pool ÷ 8 hours = 7.5 m³/h. The pump flow must not exceed the filter’s maximum flow rate. All models can handle this, but for heavy bather loads or lots of leaves, choose a larger filter area.
Important: always choose a filter whose maximum flow rate is higher than your pump’s actual flow. Not sure? Send your pool size and pump model to LINE @winwinpool and our team will calculate it for free.
Installation and Maintenance Guide
Installation
- 1Place the tank on a flat, solid, level concrete base, leaving clearance above to lift the cartridge out.
- 2Connect the pump outlet to the filter inlet, and the filter outlet to the rest of the system (heater / salt chlorinator / return jets) using the union connections.
- 3Check that the lock ring is fully locked and the drain cap is tight before starting the pump.
- 4Start the pump, open the air relief valve (if fitted) until water flows steadily, then record the gauge reading with a new cartridge as your baseline.
Maintenance
- 1When the gauge rises about 0.5–0.7 bar (8–10 psi) above the baseline, or the needle enters the CLEAN FILTER zone, remove and clean the cartridge.
- 2Hose down between the pleats from top to bottom at moderate pressure. Avoid high-pressure washers, which can damage the filter fabric.
- 3Soak periodically in cartridge cleaner to remove oils, sunscreen and scale, then rinse with clean water before refitting.
- 4Keep a spare cartridge to swap in while the other dries, and replace the cartridge when the fabric tears, pleats collapse, or pressure no longer drops after cleaning.
Frequently Asked Questions
Products Used Together
Manufacturer information: www.emauxgroup.com
Not Sure Which Model Suits Your Pool?
Send us your pool size, water volume and current pump model. The Win Win Pool Shop team will recommend the right filter and cartridge — free of charge.
Related Products
Sandia HZC-48 Multiport 5" (Without Multiport Valves)
Sandia HZC-42 Multiport 4" (Without Multiport Valves)
Sandia HZC-36 Multiport 4" (Without Multiport Valves)
Sandia HZC-30 Multiport 4" (Without Multiport Valves)
