SEKO PoolOne ORP PNRX1H1HA0100 Flowrate: 1.5L/H (embedded controller)
SKU : PNRX1H1HA0100
0 Sold
Quantity
Promotions and Special Offers
Buy products worth every ฿3,000 Get an instant discount 4%
Buy products worth every ฿5,000 Get an instant discount 5%
Buy products worth every ฿20,000 Get an instant discount 6%
Buy products worth every ฿40,000 Get an instant discount 7%
Buy products worth every ฿3,000 Get an instant discount 3% (For Everyone)
Buy products worth every ฿5,000 Get an instant discount 4% (For Everyone)
Buy products worth every ฿20,000 Get an instant discount 5% (For Everyone)
Buy products worth every ฿40,000 Get an instant discount 6% (For Everyone)
Short Description
PoolOne Type:Ditital ORP: 400÷999 mV Flow rate 1.5 l/h ; Pressure: 1.5 bar Pool Size: Indoor 5 – 130 m3 ; Outdoor 5 – 110 m3 IP65 Enclosure Dimensions 85 x 134 x 118 mm (LxHxD) Material ABS Main Board LED display 7 segments Power supply 220 Vac, 50/60Hz (Update 04/03/2026)
Accuracy ± 2 mV
PoolOne-ORP Automatic ORP Control Disinfectant Dosing Pump for Swimming Pools
A digital peristaltic dosing pump from SEKO that continuously measures ORP (Redox), an indicator of your water's sanitizing power, and automatically doses disinfectant when the value falls below the set point. Keep your water consistently clean without testing and dosing by hand. Ideal for home pools, villas, hotels and resorts.
ORP (Oxidation-Reduction Potential, or Redox) is measured in millivolts (mV) and indicates the sanitizing power of your water. The more active disinfectant there is in the water, the higher the ORP value.
PoolOne-ORP measures this value continuously. When it drops below the set point, the pump doses disinfectant into the system and stops once the set point is reached. The right ORP value depends on the pool type and disinfectant used, so please consult our team before setting it.
| PoolOne-pH | PoolOne-ORP | |
|---|---|---|
| Controls | pH of water | ORP (sanitizing level) |
| Control range | 3.2 - 8.2 pH | 400 - 999 mV |
| Accuracy | ± 0.02 pH | ± 2 mV |
| Chemical dosed | pH adjuster | Disinfectant |
| Best when | You want balanced water and stable pH | You want a consistent sanitizing level |
Want to use both models together, or not sure which suits your pool? Ask our team by phone 02-989-1111 or LINE @winwinpool
(*1) The pump has galvanic electrical insulation on both the power supply and the measurement circuit.
Illustration shows approximate proportions only, not the actual shape of the unit.
Powered by 220 - 240 Vac. Installation by a qualified technician is recommended. Make sure line pressure does not exceed the pump's maximum back-pressure (1.5 bar).
Tap the image to view full size
