ไฟ 1 เขียว ไฟ 2 แดง เครื่องเกลือ Emaux กำลังบอกอะไร?
Green Light 1 Red Light 2: What Is Your Emaux Salt Chlorinator Telling You?
WINWINPOOL has the answer!
If you are a pool technician, pool contractor, or pool owner and notice that your Emaux SSC salt chlorinator displays OPERATION 1 in green and OPERATION 2 in red, you may be wondering what the warning means and where you should start checking.
This condition may be related to low salt levels in the pool. However, low salt is not necessarily the only possible cause. The issue may also be related to scale buildup on the salt cell or low water temperature.
How to Check and Troubleshoot
1. Measure the Salt Level Before Adding Salt
Start by using a salt meter to measure the salt concentration in the pool. Compare the measured value with the recommended salt range for your specific Emaux SSC model.
4,0005,000 ppm
3,0004,000 ppm
2. Add Salt Based on the Amount Needed
If the measured salt level is below the recommended range, calculate the amount of salt required based on the pool volume and the current salt reading.
- Use swimming pool salt with at least 99% pure NaCl.
- Calculate the required amount based on pool volume and the measured salt level.
- Distribute the salt evenly throughout the pool.
- Do not dump a large amount of salt in one place or directly near the skimmer.
3. Run the Filtration System for 24 Hours
After adding salt, run the pool filtration system to allow the salt to dissolve and circulate throughout the pool. Then measure the salt level again and check the indicator lights on the unit.
Added Salt but the Red Light Is Still On?
If you have added the appropriate amount of salt but the red indicator light is still showing an abnormal condition, further inspection may be required. Possible causes can include scale buildup on the salt cell or other operating conditions within the system.
For further assistance, contact WINWINPOOL and provide the following information. This will help the team identify the appropriate troubleshooting steps.
- A photo of the control unit
- The Emaux SSC model
- The measured salt level in the pool
Need Help With Your Salt Chlorination System?
Contact WINWINPOOL for advice on checking, troubleshooting, and maintaining your swimming pool system.
For Pool Technicians & Contractors
Follow WINWINPOOL for practical swimming pool maintenance tips, equipment guides, troubleshooting techniques, and useful information that can be applied to real-world pool service work. Save and share this article with your fellow pool technicians for future reference.
