ปั๊มสระว่ายน้ำ Swimming Pool Pump

Kindly perform the following checks: Ensure that the pool circulation pump is operating. Verify that all relevant valves are fully open. Clean the pump strainer basket and the skimmer basket. Release any trapped air from the pump housing. Inspect the flow sensor to confirm that it is clean and unobstructed. If the issue persists after completing these steps, please inform us and we will arrange for a technician to conduct a detailed inspection. Thank you."**

Hydrochloric acid 35% or hydrochloric acid or Hcl 35% is used for cleaning the pool floor, concrete floor, water treatment, and pH of the pool. Dosage: 3 liters per 100 cubic meters of water when the pH exceeds the standard range of 7.2-7.6.

Why You Should Never Use Exposed Aggregate (Washed Sand Finish) Inside a Swimming Pool Using exposed aggregate or washed sand finish inside the pool is strongly discouraged because chlorine and pool chemicals gradually erode the surface, causing sand particles to loosen and detach. These particles are then carried by the water flow into the filtration system, where they often get stuck in the pump impeller, leading to wear, reduced performance, and costly pump damage. Additionally, exposed aggregate surfaces retain algae, are difficult to clean, and the rough texture may cause scratches or abrasions to swimmers. As the surface deteriorates, loose particles make the pool water cloudy and increase the frequency of maintenance, driving up long-term operating costs. ✅ Recommendation